The AirTAC GC200C06LF2K AirTAC F.R.L. Unit PT1/8 Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioned-air supply package. This GC200C06LF2K is the size 200 unit with a PT1/8 port. The filter element is the standard 40 um grade, with a polycarbonate (PC) bowl at this size, and the bowl drains by differential pressure, so collected condensate is expelled without daily manual draining. The regulator is the low-pressure type, and a square gauge scaled in psi is fitted so the set pressure can be read at a glance. A reverse (check) valve is fitted, and a mounting bracket is included. Maximum working (inlet) pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part, rated for compressed air only and for -5 to 70 C (non-freezing) operation. The GC family is available in sizes 200, 300, 400 and 600, with a choice of PT, G (BSPP) or NPT threads, manual or automatic drains, a 5 um filter element (code W), gauge scale options, and standard or low-pressure regulator types. Rated flow is published as curves rather than a single figure, so ask us to confirm sizing and datasheet figures against your application before ordering.
| Model | GC200C06LF2K AirTAC F.R.L. Unit PT1/8 Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to spray guns and air-assisted equipment in a body-shop booth, where clean, oil-misted air helps keep finishes consistent.
Conditioning supply air for the cylinders on carton sealers and case packers, giving the machine filtered, pressure-controlled, lubricated air for consistent actuation through a shift.
Treating shop air for pneumatic clamps and tool-change actuators on a machining centre, with the fitted check valve supporting the downstream circuit.
Start with size and port: 200 is the smallest step in the GC range and carries a 1/8 in PT port here; step up through 300, 400 and 600 when the application needs larger ports and more flow. Choose the drain: differential-pressure (this unit), automatic (code A) or manual (code M). The 40 um element is standard; specify 5 um (code W) where finer filtration is needed. Gauge scale is selectable (MPa, psi or bar) and this unit carries the square psi gauge. Thread is PT as standard, with G (BSPP) and NPT as order options, and a mounting bracket is included. The L in the code marks the low-pressure regulator type. Because rated flow is published only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and datasheet figures for GC200C06LF2K on request before you order.
L marks the low-pressure regulator type; the exact adjustment range for this variant is not published in our current data, so confirm it with us before ordering. K means a reverse (check) valve is fitted. The rest of the code decodes as: size 200, port 06 = PT1/8, F2 = square gauge scaled in psi, PT thread, differential-pressure drain and the standard 40 um filter element.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.