The AirTAC GC200C06LF2W AirTAC F.R.L. Combination, PT1/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06LF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-preparation set. This configuration is the size 200 unit with a PT1/8 port, the low-pressure regulator type, 5 um filtration (the W grade, finer than the 40 um standard element), a differential-pressure drain on the filter bowl, a fitted embedded square gauge reading in psi, and the mounting bracket included. In use it cleans water and particulate from the compressed air, holds the downstream pressure the circuit needs, and adds a controlled oil mist for air tools and cylinders.
This is a genuine AirTAC part. The GC series is published in sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades, gauge scales and thread options, so a set can be matched to the line it feeds. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC200C06LF2W AirTAC F.R.L. Combination, PT1/8, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding a bench of air screwdrivers, clamps and small cylinders at a workcell, where the filter removes water and swarf, the regulator holds a steady low circuit pressure, and the lubricator keeps the tools running smoothly.
Supplying the air cylinders on a carton-forming and sealing conveyor, where clean, regulated and lubricated air keeps stroke action consistent through a full shift and protects the seals in the actuators.
Dropping a compact F.R.L. set at the take-off point on a machine in a larger plant, so one machine gets its own filtered, regulated and lubricated air without reworking the main distribution ring.
Start with the size and port: the 200 frame with its PT1/8 port is the smallest step in the GC range, and larger sizes (300/400/600) carry bigger ports and more flow, so step up if the circuit demand is high. This code fixes three real choices: the low-pressure regulator type (L), the 5 um filter element (W) instead of the 40 um standard, and the differential-pressure drain, which bleeds the bowl automatically in service with no manual intervention. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are the other published options. Thread is PT as standard, with G (BSPP) and NPT available to order. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number. Send us your application details and we will confirm the flow from the datasheet and check the sizing against your demand before you order.
L marks the low-pressure regulator type, intended for circuits that run at reduced pressure; the exact adjustment range for this low-pressure version is not published, so we confirm it on request. The drain code in this model is blank, which means the differential-pressure drain: the filter bowl bleeds collected water automatically in service, with no manual draining between shifts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.