The AirTAC GC200C06LF2WG AirTAC F.R.L. Combination G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-unit F.R.L. combination: a separate filter, pressure regulator and lubricator assembled as one air-preparation set. This GC200C06LF2WG is the 200 size with a G1/8 (BSPP) port, a 5 um filter element (the finer of the two published grades), a differential-pressure drain, and a low-pressure-type regulator fitted with an embedded square gauge scaled in psi. No reverse/check valve is fitted, and the mounting bracket is included.
This is a genuine AirTAC part. The GC family spans the 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, and can be specified with manual or automatic drains, the 40 um standard element, alternative gauge scales, G or NPT threads, and a reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm the figures for your application - we supply the datasheet on request.
| Model | GC200C06LF2WG AirTAC F.R.L. Combination G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
A compact F.R.L. set at the inlet of a small bench press or clamping fixture: the 5 um element strips water and fine particulate before the valve, the low-pressure regulator holds the circuit setting shown on the psi gauge, and the lubricator mists the cylinder seals run after run.
Feeding impact drivers, nutrunners and air ratchets at a single assembly workstation, where the lubricator keeps tool motors oiled and the 5 um element protects the tools' inline valves from condensate and grit on a shared shop-air drop.
Mounted at the air inlet of a small packaging or labelling machine, the set filters, regulates and lubricates the supply to the machine's cylinders, with the differential-pressure drain bleeding accumulated water from the bowl while the line is flowing.
Size and port step up together across the GC200, GC300, GC400 and GC600 series, so pick the size whose published flow curve covers your demand rather than sizing on port alone. Within one size you choose the filter grade - 40 um standard or 5 um (this unit's W code) - the drain type (differential-pressure as here, automatic, or manual), the gauge scale (MPa, psi or bar), and the thread: PT is the standard, with G and NPT as catalogue options. The L code marks the low-pressure regulator type; its exact adjustment range is not published, so confirm it suits your circuit. Because flow is published as curves, not a single rating, ask us to check the datasheet against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your working pressure and air consumption and we will confirm the sizing from the datasheet on request before you order.
W marks the 5 um filter element, the finer of the two published grades; the standard element is 40 um. Choose 5 um where downstream valves and instruments need finer particulate removal, and 40 um where general protection is enough - both elements remove water and particulate in the filter stage of this three-unit set.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.