The AirTAC GC200C06LF2WK AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one compressed-air treatment set. This configuration, GC200C06LF2WK, is the size 200 unit with PT1/8 (1/8 in) PT ports. The filter element is the fine 5 um grade (W) and the bowl drains by differential pressure, so condensate is expelled automatically as the pressure differential builds - no manual draining routine. The regulator is the low-pressure (L) type, and the set carries a reverse/check valve (K) so downstream pressure is held if the supply drops. An embedded square gauge scaled in psi is fitted, and the mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The filter bowl on this 200 size is PC (polycarbonate).
This is a genuine AirTAC part. The GC family is published in sizes 200, 300, 400 and 600, with port sizes from 1/8 in up to 1 in, PT, G (BSPP) and NPT thread options, 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauge scale choices and standard or low-pressure regulation. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC200C06LF2WK AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps and tool-change cylinders on a compact CNC lathe or mill, with the 5 um element protecting fine air-control valves from particulate and water carryover.
Supplies treated air to the diverters, pushers and sealing cylinders along a carton or blister packaging conveyor, where the check valve holds the set pressure at the actuators if the main supply dips.
Conditions the air feeding sample-handling cylinders and small pneumatic grippers on a lab automation bench, with the low-pressure regulator suited to circuits that run below conventional plant pressure.
Start with the port step: the 200 size here gives PT1/8, and stepping up through 300, 400 and 600 moves you to larger ports and more flow capacity - match the size to the air demand of the circuit rather than the fitting alone. This unit already carries the fine 5 um element (W); the standard grade is 40 um, so choose 5 um only where downstream equipment needs finer filtration. Drain is differential-pressure as standard; automatic (A) and manual (M) versions exist if your maintenance routine prefers them. The regulator here is the low-pressure type - if your line runs at conventional working pressures, the standard type is the alternative. Gauge scale is psi on this unit; MPa and bar scales are available. Thread is PT as standard, with G (BSPP) and NPT as orderable options, and the bracket is included. Flow for the GC series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and sizing figures from the datasheet on request before you order.
The L in the code marks the low-pressure regulator type, intended for circuits that run below conventional working pressures; the exact adjustment range is not published in the standard table, so we confirm it from the datasheet on request. The K code means a reverse/check valve is fitted, which holds downstream pressure if the upstream supply is lost. If your line runs at standard pressures without a hold-up requirement, ask us about the standard-type GC configurations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.