The AirTAC GC200C06MC2K AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-treatment set. This configuration, GC200C06MC2K, is the size 200 unit with 1/8 in PT ports. The filter element is the standard 40 um grade and the bowl is drained by hand (code M), so an operator empties collected water on a routine rather than automatic basis. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and it carries a round external gauge reading in psi (code C2). A reverse/check valve (code K) is fitted, and the mounting bracket is included. The polycarbonate bowls on the filter and lubricator sections suit this size; maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part covering the full GC size range of 200, 300, 400 and 600, with options including automatic or differential-pressure drains, a 5 um filter element (code W), gauge scales in MPa, psi or bar, and G (BSPP) or NPT threads in place of the PT standard. Flow figures for this series are published as curves rather than a single rated number, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC200C06MC2K AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated and lubricated air to the clamping cylinders and fixtures on a CNC machining cell, with the psi gauge letting the setter read the clamp pressure directly and the check valve holding the circuit if supply drops.
Conditions the air feeding the stoppers, pushers and diverters on a carton packaging conveyor: the 40 um element strips water and debris, the regulator holds a steady setting, and the lubricator mists oil for the cylinder seals.
Supplies treated air to impact drivers and nutrunners at a vehicle assembly bench, where the manual-drain bowls suit a station that is drained at shift start and the round psi gauge lets operators verify tool supply pressure.
Start with the size and port: the GC series steps through sizes 200, 300, 400 and 600, and the port code here (06) gives 1/8 in PT threading - step up a size if your line's flow demand points to a larger port. Choose the drain to match maintenance habits: manual (this unit, code M) needs someone to drain the bowl, while automatic and differential-pressure drains handle it without attention. The filter grade is 40 um as standard; specify code W if the application needs 5 um filtration. Gauge options are the embedded square gauge or the external round gauge fitted here (code C), with scales in MPa (1), psi (2, this unit) or bar (3). Thread is PT as standard, with G (BSPP) and NPT available as ordered options; a reverse/check valve is ordered with code K, and the bracket is included on this unit. One honest note on sizing: flow for this series is published as curves, not a single rating, so send us your application details and we will confirm the right size against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a rated flow, Cv or SCFM figure for this unit. Send us your application - the tools or actuators it feeds and your supply pressure - and we will confirm the datasheet flow figures and check the size 200 / 1/8 in port against your demand before you order.
The M in the code means the filter bowl is drained by hand: an operator opens the drain on a routine basis to empty collected water. If you would rather not rely on that, the same GC size is available with an automatic drain (code A) or a differential-pressure drain (blank), which handle drainage without operator attention - just tell us which suits your maintenance routine when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.