The AirTAC GC200C06MC2WG AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06MC2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, pressure regulator and lubricator working as one set, sized 200 with G1/8 (BSPP) ports. This configuration carries a manual-drain filter bowl with a 5 um element (the W grade, against the 40 um standard), a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi), a round pressure gauge with a psi scale fitted, no reverse/check valve, and a mounting bracket included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The bowl on this size is PC (polycarbonate); only the 600 size uses an aluminium alloy bowl.
This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch and PT, G or NPT thread options, plus drain, filter-grade, gauge and reverse-valve choices. AirTAC publishes flow for this series as curves rather than a single rated figure, so we confirm sizing and datasheet figures on request before you order.
| Model | GC200C06MC2WG AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches and nutrunners at a bench drop, where one unit filters water and swarf to 5 um, holds a set pressure and mists oil into the tool air supply.
Supplying the pneumatic stopper and pusher cylinders along a bottling conveyor, with clean, regulated and lubricated air from a single G1/8 connection at each zone.
Conditioning shop air for air ratchets and spray guns in a fleet-service bay, protecting the tools from moisture and debris while keeping line pressure steady.
Start with the size and port step: 200-series covers the smaller ports, and flow demand should drive the step up to 300, 400 or 600 - ask us to check the published flow curves against your consumption before ordering. On this unit the drain is manual, so someone drains the bowl on a routine; if the line runs unattended, the automatic or differential-pressure drain variants are worth comparing. The 5 um element fitted here suits finer point-of-use protection; the 40 um standard grade is the choice for general upstream duty. The round psi gauge is fitted; square embedded gauges and MPa or bar scales are the other catalogue options. Thread is G (BSPP) here, with PT as the standard and NPT orderable - pick to match your piping, not delivery. A mounting bracket is included.
Because AirTAC states flow only as curves and not as a single rated number, route your sizing question to us and we will confirm the figures from the datasheet for your application.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC does not publish a single rated flow figure for the GC series; flow is given as performance curves instead. Tell us your operating pressure and air consumption and we will confirm the sizing from the datasheet on request - no estimate is quoted here.
This configuration is coded M for a manual drain: the bowl is emptied by hand as part of routine checks, which suits attended lines. The catalogue also offers automatic (code A) and differential-pressure (blank, the default) drains on GC units if the installation runs unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.