The AirTAC GC200C06MC2WK AirTAC F.R.L. Combination PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one unit, so the incoming compressed air is cleaned of water and particulate, regulated to the set pressure, and given an oil mist for downstream tools and cylinders in a single installation. This GC200C06MC2WK is the size 200 unit with PT1/8 (1/8 in) ports. It carries the 5 um filter element (code W) instead of the standard 40 um, a manual drain on the filter bowl, a round pressure gauge reading in psi, a reverse/check valve, and a mounting bracket.
It is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and catalogue options for drain type, filter grade, gauge style and scale, thread (PT standard; G and NPT to order) and check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GC200C06MC2WK AirTAC F.R.L. Combination PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds the assembly hall's pneumatic circuit for impact wrenches, nut runners and clamping fixtures: the filter section strips water and swarf from the shop air, the regulator holds a steady working pressure at the stations, and the lubricator mists oil to the air tools along the line.
Supplies the cylinders and air grippers on a carton-forming and sealing conveyor. Clean, regulated, lubricated air keeps the pusher and clamp cylinders moving predictably through shift after shift, and the manual drain lets maintenance empty the bowl during scheduled stops.
Mounted at the drop feeding a CNC machine tool's pneumatic circuit - tool-change cylinders, chip doors and air blast. The 5 um element gives finer protection for the machine's air components, the regulator sets the machine's required supply pressure, and the check valve holds the circuit against backflow.
Size 200 with PT1/8 ports is the entry step of the GC range; step up to 300, 400 or 600 when the application's flow demand outgrows the port. The manual drain means the filter bowl is emptied by opening its drain valve by hand - choose the automatic or differential-pressure drain option if the unit will be hard to reach. This unit carries the 5 um element (W); the standard 40 um element suits general-purpose air if finer filtration is not required. The regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) on this manual-drain set. The round gauge here reads in psi; the embedded square gauge and MPa or bar scales are the other catalogue choices. Thread is PT as standard, with G (BSPP) and NPT as order options, and the bracket is included. Flow is published as curves, not a single rating, so send us your flow requirement and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a flow number here. Send us your required flow and working pressure and we will confirm from the datasheet whether the size 200 unit at PT1/8 suits your application.
The manual drain (code M) means the filter bowl is emptied by opening its drain valve by hand at intervals. If the unit will be mounted where routine access is difficult, the automatic or differential-pressure drain options remove that task. Manual drain also gives the widest regulator adjustment range, 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.