The AirTAC GC200C06MF2 AirTAC F.R.L. Combination Unit PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06MF2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This configuration is the 200 size with a PT1/8 port and PT (parallel) thread as standard. The filter element is the standard 40 um grade, the bowl uses a manual drain, and the regulator is the standard type with an embedded square gauge reading in psi. A mounting bracket is included, and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GC family is offered in 200, 300, 400 and 600 sizes with a choice of ports, drain types, filter grades, gauge scales and thread options (PT standard, G and NPT to order). Flow is published by AirTAC as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GC200C06MF2 AirTAC F.R.L. Combination Unit PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated and lubricated air to the cylinders and air tools on a small assembly or stamping press, where the operator drains the bowls as part of a daily routine.
Conditioning the supply to diverters, pushers and gripper cylinders on a bottling or packaging conveyor, keeping water and particulate out of the valves while oil mist carries downstream.
A point-of-use F.R.L. on the drop lines of a maintenance or repair workshop, so impact wrenches and air ratchets get regulated pressure and lubrication at the bench.
Start with the size and port: the 200 size carries a 1/8 in port here, and the larger steps (300/400/600) open up bigger ports and more flow - match the step to the air demand of the circuit rather than oversizing blindly. Choose the drain to suit access: this unit has a manual drain, which suits attended installations where an operator can bleed the bowl; automatic and differential-pressure drains are available in the family for unattended duty. The 40 um element is the standard grade; a 5 um element (code W) is offered where finer particulate removal is needed. The embedded square gauge here reads psi; MPa and bar scales and an external round gauge are options. Thread is PT as standard, with G (BSPP) and NPT as order options, and a mounting bracket is included.
Because AirTAC publishes flow as curves and not a single rated number, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one rated flow number we can quote. Send us your air demand and line conditions and we will confirm the flow and datasheet figures for this 200-size, PT1/8 unit on request before you order.
The M in the code GC200C06MF2 specifies a manual drain, meaning the filter bowl is bled by hand - a good fit where the unit is accessible and checked regularly. If the installation is unattended, the same GC200 size in 1/8 in PT is available with automatic or differential-pressure draining; just specify the alternate drain code when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.