The AirTAC GC200C06MF2K AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06MF2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning stack. This size 200 unit is fitted with a PT1/8 (1/8 in) PT-thread port, a manual drain on the filter bowl, the standard 40 um filter element, a square pressure gauge scaled in psi, a reverse/check valve, and a mounting bracket. The filter bowl on this size is polycarbonate. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). With the manual drain fitted, the regulator adjustment range is 0.05-0.9 MPa (7-130 psi).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, each stepping up in port size and flow capacity, with options including automatic or differential-pressure drains, a 5 um (W) filter element, gauge scale in MPa, psi or bar, and G (BSPP) or NPT thread variants to order. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC200C06MF2K AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding a machining centre's pneumatic clamps, tool-change actuators and air-blast nozzles with filtered, regulated and lubricated air from a single conditioning stack at the machine.
Conditioning the supply to a cartoner or case packer, where cylinders and grippers need water and particulate removed, a set working pressure, and a fine oil mist for long seal life.
Supplying impact drivers, ratchets and air cylinders at a bench or cell, with the regulator set to the tool's rated pressure and the lubricator metering oil mist into the tool air.
Start with the size and port: this configuration is size 200 with a PT1/8 port, the smallest step in the GC range, so check it against the line size and the air demand of the equipment it will feed. Choose the drain to suit access: this unit has a manual drain, which suits attended installations where an operator can bleed the bowl; automatic or differential-pressure drains are available if the unit will be left unattended. The standard element is 40 um; specify the W code for 5 um if downstream valves or cylinders need finer filtration. The fitted square gauge here reads in psi; MPa and bar scales, and an external round gauge, are options. Thread is PT as standard, with G (BSPP) and NPT available as order options, and a mounting bracket is included. Flow for this family is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a flow number here. Tell us your line size and air demand and we will confirm the flow from the datasheet and check the sizing of this unit against your application on request.
The M in the code specifies a manual drain on the filter bowl: collected water is released by hand rather than automatically. It suits attended installations where an operator drains the bowl as part of routine checks. If the unit will be installed in an inaccessible or unattended position, ask about the automatic or differential-pressure drain options for this family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.