The AirTAC GC200C06MLC2W AirTAC F.R.L. Combination PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled into one prepared-air unit. This GC200C06MLC2W is the size 200 set with a 1/8 in PT1/8 port, a 5 um filter element (the finer of the two published grades), a manual drain on the filter bowl, a low-pressure regulator and a round gauge reading in psi. The metal bowls hold the collected water and the oil reservoir, and the mounting bracket is included.
It is a genuine AirTAC part, rated for compressed air at up to 1.0 MPa (145 psi) inlet and -5 to 70 C (non-freezing). The GC family is also published in sizes 300, 400 and 600 with larger ports, plus a choice of drain type, 40 um or 5 um filtration, gauge style and scale, and G or NPT thread options. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GC200C06MLC2W AirTAC F.R.L. Combination PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air agitators at a paint or coating station: the 5 um element strips water and particles ahead of the regulator, which holds a steady low working pressure, while the lubricator mists oil to keep gun seals and needle valves moving smoothly.
Supplying impact wrenches, ratchets and grinders at a plant maintenance bench: one unit filters the shop air to 5 um, regulates it down to the tool's working pressure and adds oil mist, with the manual drain letting the technician clear collected water each shift.
Preparing air for the cylinders and vacuum generators on a carton-sealing or case-packing conveyor: clean, regulated and lubricated air from a single PT1/8 drop protects the machine's valves and actuators through long production runs.
Choose the size by the port and flow step: 200 is the smallest, with 300, 400 and 600 stepping up in port and capacity - match the published flow curves to your air demand before ordering. This code is already fixed at 5 um filtration with a manual drain, a low-pressure regulator and a round psi gauge; if you need the standard 40 um element, automatic or differential-pressure drain, the embedded square gauge or an MPa/bar scale, those are separate catalogue codes. Thread is PT as standard, with G (BSPP) and NPT available to order, and the bracket is included. Because flow is published as curves rather than one rated figure, send us your application details and we will confirm sizing before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Send us your working pressure and air demand and we will confirm the correct size from the datasheet on request.
This code specifies the low-pressure regulator variant, intended for circuits that hold pressure below the standard adjustment range. AirTAC does not publish a single adjustment range for this variant, so tell us your set pressure and we will confirm suitability from the datasheet before you order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.