The AirTAC GC200C06MLC2WG AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled to deliver filtered, regulated and lubricated compressed air from a single prep point. This configuration is the size 200 frame with a G1/8 (BSPP) port, a low-pressure type regulator, 5 um filtration (the W grade, tighter than the 40 um standard element), a manual drain on the filter bowl, a round pressure gauge reading in psi, and a mounting bracket included. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, thread options (PT standard, G and NPT to order), drain types, filter grades and gauge scales. Flow is published by AirTAC as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GC200C06MLC2WG AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns on a finishing line: the filter strips water and 5 um particulate, the low-pressure regulator holds a gentle, stable setting at the gun, and the lubricator mists oil into the air line.
Supplying small pick-and-place and sealing cylinders on a packaging conveyor, where the three-unit set keeps the actuators clean, regulated and lubricated from one 1/8 in drop.
Air prep for benchtop test rigs and small laboratory automation, where the 5 um grade protects sensitive pneumatic components and the psi gauge gives a readable local pressure reference.
Start with the port step: size 200 with a 1/8 in port is the smallest frame in the GC range, so match it against the air consumption of the downstream circuit and step up to 300, 400 or 600 if the line demands more. This unit carries the W code, meaning the 5 um element rather than the 40 um standard - choose 5 um where downstream valves and instruments need finer particulate and water removal. The manual drain means an operator or maintenance round opens the drain rather than relying on an automatic or differential-pressure mechanism; pick automatic drainage if the bowl is hard to reach. The round external gauge here reads in psi; embedded square gauges with MPa, psi or bar scales are the catalogue alternative. Thread is G (BSPP) on this code, with PT as the standard and NPT available to order, and the bracket is included.
Because AirTAC publishes flow as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow figures from the datasheet on request before you order.
The W code in the model selects the 5 um element instead of the 40 um standard, giving finer removal of water and particulate ahead of the regulator and lubricator. The M code selects a manual drain, so the filter bowl is emptied by hand during maintenance rounds; automatic and differential-pressure drains are available on other codes if the bowl cannot be reached easily.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.