The AirTAC GC200C06MLF2 AirTAC F.R.L. Combination PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06MLF2 is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, pressure regulator and lubricator built up as one prepared-air station for a compressed-air line. This configuration is the 200 size with a PT1/8 port (PT thread as standard; G and NPT are order options), 40 um standard filtration, a manual drain on the filter bowl, a low-pressure-type regulator, and an embedded square gauge scaled in psi. No reverse/check valve is fitted, and a mounting bracket is included.
It is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600, so you can step port and body size to the line; maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. At this 200 size the filter bowl is polycarbonate (the 600 size uses aluminium alloy). Because AirTAC publishes flow as curves rather than a single rated figure, we confirm flow and datasheet details on request.
| Model | GC200C06MLF2 AirTAC F.R.L. Combination PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Mounted at the drop to a snack-food packaging machine, the set strips water and particles, holds a low regulator setpoint for the bag-seal cylinders, and mists oil for the valve and actuator train. The manual drain suits a line that is bled at fixed shift intervals.
On a CNC router cell, the filter protects the clamp cylinders from sawdust-laden wet air, the low-pressure regulator holds gentle clamping force, and the lubricator conditions the pneumatic cylinders. The psi-scaled square gauge gives technicians a direct US-unit read.
Feeding diverters and pushers on a bottling conveyor, the combination keeps grit out of the valves, regulates supply at low pressure for delicate container handling, and carries oil mist downstream. The included bracket simplifies mounting beside the drive.
The real choices within GC are the size and port step (200/300/400/600 against ports from 1/8 in to 1 in), which you set against the air your line consumes; the drain type on the filter bowl (differential-pressure is the default, automatic is code A, and manual is code M - as on this unit); the filter grade (40 um standard, 5 um with the W code); the gauge (embedded square as standard, external round optional, in MPa, psi or bar scales); the regulator type (standard or low-pressure - this unit is low-pressure, and its exact adjustment range is not published, so we confirm it on request); and the thread (PT standard, G or NPT to order). Flow is published as curves, not one rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes GC-series flow as performance curves rather than a single rated number, so we do not quote a figure here. Send us your line pressure, port size and downstream demand, and we will confirm the flow and the full datasheet for this 200-size, PT1/8 unit on request.
This unit carries the M code, so collected water is bled by hand from the filter bowl. GC combinations are also available with the default differential-pressure drain or with an automatic drain (code A). Tell us how often the line is attended and we will point you to the matching code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.