The AirTAC GC200C06MLF2K AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC200C06MLF2K is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air from a single assembled set: a separate filter, a regulator and an oil-mist lubricator. This configuration is the 200 size with a PT1/8 port, a manual drain on the filter bowl, the standard 40 um filter element, a low-pressure type regulator, an embedded square gauge scaled in psi, a reverse/check valve fitted, and a mounting bracket included. The manual drain means the accumulated water is released by opening the drain valve by hand as part of routine checks.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port options, automatic or differential-pressure drains, a 5 um (code W) filter element, gauge scale choices and G or NPT thread variants. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application.
| Model | GC200C06MLF2K AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
A bench-mounted pneumatic press or riveting station takes its air through this unit: the filter strips water and particles, the low-pressure regulator holds a steady supply pressure to the cylinder valve, and the lubricator mists oil to the cylinder seals.
On a carton-forming or sealing conveyor, air cylinders actuate clamps and pushers. This F.R.L. set at the line drop conditions the supply, keeps regulator setting stable between cycles, and delivers lubricated air to the cylinders and their control valves.
Looms and knitting machines run many small air jets and cylinders from a shared drop. This unit conditions that drop - filtered, regulated and lubricated - with the check valve helping hold the downstream setting if the main supply dips.
Start with the port step: the 200 size here gives PT1/8; step up to 300, 400 or 600 for larger ports and more flow. Choose the drain to suit maintenance practice - manual (this unit) needs a hands-on check, while automatic and differential-pressure drains discharge condensate without opening a valve. The filter grade is 40 um as fitted here; specify W for the 5 um element where downstream equipment needs finer filtration. This unit carries the low-pressure type regulator, and the embedded square gauge is scaled in psi (MPa and bar scales are also available). Thread is PT as standard, with G (BSPP) and NPT as orderable options, and the bracket is included.
One honest note on sizing: flow for this series is published as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the datasheet figures against your required flow before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number on the page. Tell us your working pressure and required flow and we will confirm the datasheet curve figures for this exact model before you order.
This configuration is coded M for a manual drain: accumulated water in the filter bowl is released by hand during routine checks. The GC series is also available with automatic or differential-pressure drains that discharge condensate without manual operation - ask us for those variants if unmanned drainage suits your installation better.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.