The AirTAC GC200C06MLF2WGK AirTAC F.R.L. Combination G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC200C06MLF2WGK is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set. This configuration is built with G1/8 (BSPP) ports, a 5 um filter element for finer water and particulate removal, a manual drain on the filter bowl, and a low-pressure type regulator fitted with an embedded square gauge scaled in psi. A reverse/check valve is fitted, and a mounting bracket is included.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with a choice of port sizes, drain types (differential-pressure, automatic or manual), 40 um or 5 um filtration, gauge style and scale, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so ask us to confirm sizing or any datasheet figure on request.
| Model | GC200C06MLF2WGK AirTAC F.R.L. Combination G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds the cylinder circuit on a compact bench press or stamping fixture, where the filter cleans incoming air, the low-pressure regulator holds a reduced working pressure for the tooling, and the lubricator mists oil to the valve and cylinder seals.
Conditions the air feeding pick-and-place cylinders and grippers on a packaging or cartoning conveyor, keeping moisture and fine particulate out of the actuators while delivering lubricated air for consistent cycling.
Prepares air for pilot-operated valves and small actuators on a process or utility skid, with the 5 um element protecting sensitive pilot components and the psi-scaled gauge giving operators a direct local pressure readout.
Start with the port size: this unit is the 200 size with G1/8 ports, the smallest step in the GC range; step up to 300, 400 or 600 when the application needs larger ports and more flow. The 5 um element (code W) suits applications that need finer filtration than the 40 um standard; the manual drain means an operator opens the drain periodically rather than relying on an automatic or differential-pressure drain. The low-pressure type regulator is intended where working pressures sit below the standard regulator's range; the exact adjustment range for this low-pressure type is not published in the material we hold, so confirm it with us before ordering. The square gauge is scaled in psi; MPa and bar scales and an external round gauge are alternatives in the series.
Thread is G (BSPP) here; PT is the catalogue standard and NPT is available to order as a specification choice. A bracket is included with this configuration. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one rated flow number we can quote for this 200-size, G1/8 unit. Tell us your application and we will confirm the flow from the datasheet curves on request before you order.
The L in the code marks this as the low-pressure type regulator rather than the standard one, intended for applications working below standard regulator pressures. The exact adjustment range for the low-pressure type is not published in our material, so confirm the range with us on request. The unit also carries a manual drain, a 5 um filter element, a square psi gauge, a reverse/check valve and an included mounting bracket.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.