The AirTAC GC200C08C2G AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08C2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-preparation set. This size-200 configuration is fitted for 1/4 in ports with G (BSPP) thread, carries a 40 um filter element, uses a differential-pressure drain on the filter bowl, and includes a round pressure gauge reading in psi. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the unit is supplied with a mounting bracket.
This is a genuine AirTAC part from the GC range, which spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in and thread choices of PT (standard), G and NPT. Filter grade can be specified as 40 um standard or 5 um (code W), and drain types include differential-pressure, automatic and manual. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200C08C2G AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated and lubricated air to the cylinders and actuators on a carton-forming and sealing line, with the psi gauge giving operators a visible setpoint at the machine drop.
Serves as the single air-preparation set at the inlet of a control panel or manifold, filtering water and particulate, holding the regulator setpoint and oil-misting downstream valves and cylinders.
Prepares air for conveyor stopper, clamp and lift cylinders on an assembly line, where the 40 um element protects directional valves and the lubricator keeps cylinder seals working smoothly.
Choose the size and port step against the air consumption of the downstream circuit: this unit is size 200 with a 1/4 in port in G thread (PT is the standard thread; G and NPT are catalogue options to order). The filter grade is 40 um as coded; if finer filtration is needed, the same family is available with a 5 um element (code W). The drain here is differential-pressure, which bleeds collected condensate when the pressure differential rises; automatic (code A) and manual (code M) drains are alternatives depending on how the installation is attended. The gauge in this code is a round external gauge on the psi scale; embedded square gauges and MPa or bar scales are the other catalogue choices. Because flow is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this family as curves rather than a single rated figure, so no single l/min or SCFM number exists to quote. Tell us your operating pressure and air consumption and we will confirm the flow curve and correct sizing from the datasheet on request.
A blank drain position in the GC code means a differential-pressure drain, which discharges collected condensate automatically as the pressure differential across the filter rises. If your installation needs a different behaviour, the same unit is available with an automatic drain (code A) or a manual drain (code M).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.