The AirTAC GC200C08C2GK AirTAC F.R.L. Combination Unit G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08C2GK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This configuration is built for 1/4 in lines with G (BSPP) ports, carries the standard 40 um filter element with a differential-pressure drain on the filter bowl, and regulates outlet pressure across the standard 0.15-0.9 MPa (20-130 psi) range. A round external gauge scaled in psi is fitted, a reverse/check valve is included, and the set comes with a mounting bracket.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in and PT, G or NPT thread options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC200C08C2GK AirTAC F.R.L. Combination Unit G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated and lubricated air to a workshop air drop or manifold that supplies hand tools, cylinders and small actuators on a 1/4 in branch line.
Conditioning the air supply for pneumatic cylinders that drive packaging heads, clamps and conveyor stoppers, where steady regulated pressure and oil mist extend seal life.
Mounting a compact three-piece F.R.L. set at the air inlet of a purpose-built machine or fixture panel, giving the builder filtration, regulation and lubrication in one bracketed assembly.
Size 200 with a 1/4 in port suits lighter-duty circuits; step up to 300/400/600 when the line or required flow grows - flow is published as curves, not a single rating, so let us confirm sizing against your demand. The 40 um standard element is right for general plant air; choose the 5 um (W) element where finer filtration is needed. The differential-pressure drain bleeds the bowl automatically as pressure drops across the element; automatic (A) or manual (M) drains are alternative orderable choices. The fitted round gauge reads in psi; square embedded gauges and MPa or bar scales are the other catalogue options. G (BSPP) thread is specified on this unit, with PT and NPT available to order, and the bracket is included.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your line size and air demand and we will confirm the datasheet flow figures for the GC200 against your application before you order.
The code C2 in GC200C08C2GK specifies an external round gauge scaled in psi, instead of the standard embedded square gauge; MPa and bar scales are the other orderable options. The trailing K specifies a reverse/check valve fitted on the regulator, which holds the downstream setting if upstream pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.