The AirTAC GC200C08C2W AirTAC F.R.L. Combination, PT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08C2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioned-air supply for compressed-air systems. This size-200 unit carries PT1/4 ports with standard PT thread, a 5 um filter element (the finer W grade, versus the 40 um standard), a differential-pressure drain on the filter bowl, and a standard-type regulator with an adjustment range of 0.15-0.9 MPa (20-130 psi). It is fitted with an external round gauge scaled in psi, and the mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port sizes from 1/8 to 1 inch, a choice of PT, G (BSPP) or NPT thread, manual or automatic drain options, 40 um or 5 um filtration, and gauge style and scale choices. Flow is published in the catalogue as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC200C08C2W AirTAC F.R.L. Combination, PT1/4, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Conditioning a workshop or plant air drop that feeds a mix of pneumatic hand tools, cylinders and small air-powered equipment, giving filtered, regulated and lubricated air at one take-off point.
Supplying the air cylinders and air-operated diverters on a packaging or bottling conveyor line, where clean, pressure-stabilised and lubricated air keeps stopper and pusher actions consistent through the shift.
Feeding the pneumatic clamps and tool-holding fixtures on a CNC or machining cell, where stable regulated pressure and oil-mist lubrication support repeatable clamping and longer seal life.
Start with the size and port: the 200 frame with 1/4 inch PT ports suits lighter-duty circuits, and stepping up to 300, 400 or 600 gives larger ports and more flow capacity - match the frame to the air demand of the circuit rather than the pipe alone. This unit is ordered with the 5 um element; if your application only needs bulk water and particulate removal, the 40 um standard grade is the lower-restriction choice. The differential-pressure drain on this configuration flushes the bowl automatically as the pressure across the element builds; manual and fully automatic drains are available if your duty cycle or maintenance routine calls for them. The round gauge here is scaled in psi; square embedded gauges and MPa or bar scales can be specified instead. Thread is standard PT, with G (BSPP) and NPT available to order, and the bracket is included. Flow for this family is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves in the catalogue rather than a single rated figure, so we do not quote one number here. Tell us your application and operating pressure and we will confirm the flow and sizing figures from the datasheet on request before you order.
The W code on this model specifies the 5 um element, which removes finer particulate than the 40 um standard element. It suits circuits feeding sensitive components such as precision valves or instrument air take-offs. If your application only needs bulk water and debris removal, the 40 um grade is available on other GC200 configurations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.