The AirTAC GC200C08C2WG AirTAC F.R.L. Combination Unit G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC200 series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one coordinated set. This configuration, GC200C08C2WG, is the 200 size with a G1/4 (1/4 in) port, G thread, a 5 um filter element (the finer of the two catalogue grades), differential-pressure automatic draining, a standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range, a round pressure gauge reading in psi, and a mounting bracket included. In use it filters water and particulate from the compressed air, holds a set working pressure, and carries oil mist downstream to extend the life of pneumatic cylinders, valves and air tools on the same supply line.
This is a genuine AirTAC part. The GC family is published in 200, 300, 400 and 600 sizes with port sizes from 1/8 in up to 1 in, a maximum inlet pressure of 1.0 MPa (145 psi), and a working temperature range of -5 to 70 C (non-freezing). Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200C08C2WG AirTAC F.R.L. Combination Unit G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Clean, regulated and lubricated air feeding the tool-clamp cylinders, chip-clearing jets and pallet-clamping circuits of a CNC machining centre, with the 5 um element protecting fine pilot valves.
Conditioning the air that drives case-erector, carton-sealing and wrapping cylinders on a packaging line, holding a stable regulator setting and oil-misting the actuators through continuous shifts.
Point-of-use treatment ahead of spray guns in a paint booth: water and particulate removed by the 5 um filter, pressure set at the regulator, and a light oil mist carried to air-operated gun triggers and agitators.
Start with the size and port: the 200 size with a 1/4 in connection suits compact supply lines, while stepping up to 300, 400 or 600 gives larger ports and more flow capacity - match the step to the air demand of the downstream circuit. Choose the filter grade: 40 um is the standard element and 5 um (this unit, code W) is the finer option for more sensitive equipment. Choose the drain: differential-pressure draining (fitted here) discharges condensate automatically on pressure differential, while automatic (A) and manual (M) variants are available in the family. Select the gauge and its scale - MPa, psi or bar, embedded square or external round - and the thread: PT is the standard, with G (BSPP) and NPT available as order options. Flow for this series is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and line conditions and we will confirm the datasheet flow figures and check the 200 size against your air demand before you order.
The GC family is offered with a 40 um standard element or a finer 5 um element (the W code in the model number). This unit carries the 5 um grade, which suits circuits feeding more sensitive components such as pilot valves and air tools; the 40 um grade remains available if your application does not need the finer filtration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.