The AirTAC GC200C08C2WGK AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built as one unit. This size 200 configuration carries a G1/4 port, the 5 um W-grade filter element (finer than the 40 um standard), a differential-pressure drain on the filter bowl, a round gauge reading in psi, and a reverse/check valve fitted. A mounting bracket is included, and the regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range.
This is a genuine AirTAC part, made for compressed air at up to 1.0 MPa (145 psi) and -5 to 70 C (non-freezing). The GC family spans sizes 200 to 600 with a choice of ports, drain types, filter grades, gauge styles and scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC200C08C2WGK AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated and lubricated air to the machine's pneumatic actuators, tool-clamp and chip-clearing cylinders, with the 5 um element protecting the fine control valves downstream.
A single point-of-use conditioning station for a bottling or cartoning line, where the filter removes water and particles, the regulator holds a steady setting and the lubricator mists oil for the line's air cylinders.
Conditioning the bench drops that feed impact wrenches, nutrunners and air ratchets, with the check valve holding downstream pressure if the main supply dips.
Choose the size by the port and flow step: 200 sits at the compact end of the GC range, here with a G1/4 (BSPP) thread; PT is the standard thread and G or NPT are order options. This unit is already specified with the 5 um W-grade element instead of the 40 um standard, a differential-pressure drain, a round psi gauge and a check valve. If you would rather have the coarser 40 um grade, a manual or automatic drain, a different gauge scale (MPa or bar) or the embedded square gauge, those are decodable variants within the same family. Because flow is published as curves rather than a single rated figure, send us your application and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one number we can quote. Tell us your application and required flow and we will confirm the right size from the datasheet before you order.
The W in the code GC200C08C2WGK selects the optional 5 um grade instead of the 40 um standard element, giving finer removal of particulate and water carryover. The differential-pressure drain handles collected condensate without a manual draining routine.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.