The AirTAC GC200C08C2WK AirTAC F.R.L. Combination, PT1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08C2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This configuration is built around a 1/4 in PT port in the 200 size, with 5 um filtration (the finer W grade instead of the standard 40 um element), a differential-pressure drain on the filter bowl, and a standard regulator covering 0.15-0.9 MPa (20-130 psi). The round external gauge is fitted and scaled in psi, a reverse/check valve is fitted, and the set includes a mounting bracket. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC line is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge style and scale, thread (PT standard, with G and NPT as orderable options) and reverse valve. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures for your application on request.
| Model | GC200C08C2WK AirTAC F.R.L. Combination, PT1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Clean, regulated and lubricated air for the sealing, clamping and pusher cylinders on a carton or case packaging conveyor, with the 5 um element protecting downstream valves from water and fine particulate.
Point-of-use preparation for the air supplied to a CNC machining centre's tool-change and clamping circuits, where the regulator holds a stable setpoint and the lubricator feeds mist to actuated components.
Filtration, regulation and oil-mist lubrication for the gripper and filler actuators on a bottling line, with the psi-scaled round gauge letting operators verify line pressure at a glance.
Start with the port and size: this unit is the 200 size at 1/4 in PT, so step up to GC300/GC400/GC600 if your line needs larger ports and more flow. Choose the drain to suit access: differential-pressure drain (as fitted here), automatic drain, or manual drain - note the regulation range differs by drain type. Choose the filter grade: 40 um standard or 5 um (W) for finer particulate and water removal, as selected here. Pick the gauge style and scale: embedded square gauge standard, external round gauge optional, with MPa, psi or bar scales - this unit carries the round gauge in psi. Thread is PT as standard; G (BSPP) and NPT are catalogue options to order. A reverse/check valve (K) and bracket are fitted on this code.
Flow for this family is published as curves, not a single rated number, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one rated flow number we can quote. Send us your required flow and working pressure and we will confirm the sizing from the datasheet on request.
The W in the code GC200C08C2WK selects the optional 5 um filtration grade; the GC standard element is 40 um. The 5 um grade removes finer particulate and water from the air before it reaches the regulator and lubricator, which suits sensitive downstream valves and actuators. If your application tolerates coarser filtration, the standard 40 um grade is available on other codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.