The AirTAC GC200C08F2W AirTAC F.R.L. Combination 1/4 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08F2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one working set. This 200-size unit is fitted with a 1/4 in PT port, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain on the filter bowl, a standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range, and a psi-scale gauge. A mounting bracket is included. It prepares compressed air in one pass: water and particulate are removed, downstream pressure is set and held, and a fine oil mist is carried to the connected equipment.
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge scale, thread form (PT standard, G and NPT as order options) and reverse/check valve. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200C08F2W AirTAC F.R.L. Combination 1/4 in PT |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted applicators on a paint line, where the 5 um element protects finish quality, the regulator holds a set gun pressure and the lubricator mists the air tooling.
Supplying the stopper, pusher and clamp cylinders along a packaging conveyor, with clean, regulated and lubricated air keeping the valves and actuators working consistently through the shift.
Conditioning the shop-air feed to a CNC machining centre, where the filter removes water and chips of contamination from the compressed-air line and the lubricator serves air-powered peripherals.
Size and port: the GC series steps through 200, 300, 400 and 600 sizes with matching port sizes, so pick the size whose flow curve covers your demand with margin - we can check a specific curve against your consumption if you send the figures. Drain type: this unit uses the differential-pressure drain (the default); automatic (A) and manual (M) drains are available on the family if your installation needs them. Filter grade: this configuration carries the 5 um element (code W) instead of the 40 um standard - choose 5 um where downstream equipment is sensitive to fine particulate. Gauge: the psi-scale gauge is fitted; MPa and bar scales and an external round gauge are alternatives. Thread: PT is the standard; G (BSPP) and NPT are orderable options. A mounting bracket is included.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so we do not quote a flow figure here. Ask us to confirm the datasheet and check the curve against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not state a flow number here. Send us your operating pressure and air consumption and we will confirm the datasheet and check the GC200 curve against your application before you order.
The GC series normally carries a 40 um element; the code W in GC200C08F2W selects the finer 5 um grade. Choose 5 um where downstream valves, cylinders or tools are sensitive to fine particulate. If you only need bulk water and coarse dirt removal, the 40 um standard grade is the lower-restriction choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.