The AirTAC GC200C08LC2K AirTAC F.R.L. Combination, PT1/4, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built as one air-preparation set. This GC200C08LC2K is the size 200 unit with PT1/4 (1/4 in) ports. It removes water and particulate down to 40 um, regulates downstream pressure with the low-pressure type regulator, and adds oil-mist lubrication for cylinders and air tools. The polycarbonate bowl drains by differential pressure, a round gauge graduated in psi is fitted, a reverse/check valve is built in, and the set is supplied with a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and with a choice of drain type, 40 um or 5 um (code W) filtration, gauge scale in MPa, psi or bar, and PT, G or NPT threads. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and datasheet details for your application before ordering.
| Model | GC200C08LC2K AirTAC F.R.L. Combination, PT1/4, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
A combined filter, regulator and lubricator feeding carton sealers, case packers and wrapping heads on a packaging line, delivering clean, regulated, lubricated air from a single mounting point.
Filtered, regulated, oil-mist lubricated air for the stopper, pusher and lift cylinders that index cartons along a sorting conveyor, with the regulator set to the pressure the cylinders were designed around.
A drop at a maintenance workshop bench supplying impact wrenches, ratchets and air drills, where the lubricator mists oil into the stream and the 40 um filter catches water and pipe scale.
Size 200 with PT1/4 ports suits circuits plumbed at 1/4 in; step up to sizes 300, 400 or 600 when the installation calls for larger ports and more flow. Drain options are differential-pressure (fitted here), automatic or manual. Filtration is 40 um standard; choose code W for 5 um where finer particle removal matters. The round gauge on this unit reads in psi; embedded square gauges and MPa or bar scales are alternatives. Thread is PT as standard, with G (BSPP) and NPT available to order. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and sizing from the datasheet on request.
L marks the low-pressure type regulator. The exact adjustment range for the low-pressure version is not published in the catalogue, so ask us to confirm it against your set pressure before ordering. For reference, the standard GC regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) on manual-drain sets and 0.15 to 0.9 MPa (20-130 psi) with automatic or differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.