The AirTAC GC200C08LF2G AirTAC F.R.L. Unit | G1/4 | Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08LF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set. This 200-size configuration carries G1/4 ports with G thread, a 40 um filter element with differential-pressure drain, a low-pressure type regulator, and a fitted embedded square gauge scaled in psi. The differential-pressure drain bleeds accumulated condensate automatically whenever the pressure drop across the filter element rises far enough, so the bowl does not need manual draining under normal duty. A mounting bracket is included.
This is a genuine AirTAC part. The GC family is offered in 200, 300, 400 and 600 sizes with port sizes from 1/8 in up to 1 in, and with options including automatic or manual drains, a 5 um filter element (code W), alternative gauge scales in MPa or bar, and NPT thread as an order option. Flow is published by AirTAC as curves rather than a single rated figure; ask us and we will confirm the datasheet figures for your application on request.
| Model | GC200C08LF2G AirTAC F.R.L. Unit | G1/4 | Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Spray booths and coating guns run at low regulated pressure and need clean, dry, oil-misted air so the atomising air stays consistent through a full shift. This three-unit set filters, regulates at low pressure and lubricates in one assembly at the booth drop.
Bench-mounted air cylinders and impact drivers on an assembly bench draw from a shared drop; a low-pressure regulator set here keeps actuation gentle on delicate parts while the lubricator feeds the tooling downstream.
Looms, baggers and carton sealers run many small air jets and cylinders continuously. Conditioning the machine feed with filtered, regulated, lubricated air at G1/4 protects the valve islands and keeps jet pressure stable.
Size this unit by the flow your line needs: the 200 size with 1/4 in ports is the smallest step in the GC range, and 300, 400 and 600 sizes step up in port and flow capacity. Because AirTAC publishes flow as curves and not a single rating, ask us to confirm sizing against your application before ordering. The low-pressure type regulator in this code is chosen where the circuit works below the standard regulator band; its exact adjustment range is not published, so confirm it with us. The 40 um element is the standard grade; specify code W for 5 um where finer filtration is needed. The fitted square gauge reads in psi; MPa or bar scales are available. Thread is G as coded, with PT as the catalogue standard and NPT an order option. A mounting bracket is included.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and datasheet figures for this 200-size, G1/4 unit on request.
The L in the code marks the low-pressure type regulator, selected where the circuit operates below the standard regulator band. Its exact adjustment range is not published in the material we hold, so confirm the working range with us before ordering. The fitted square gauge on this unit reads in psi.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.