The AirTAC GC200C08LF2K AirTAC F.R.L. Combination, PT1/4, psi Gauge is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08LF2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one coordinated set. This configuration is the 200 size with a PT1/4 port, the standard 40 um filter element, and a differential-pressure drain on the filter bowl that bleeds accumulated condensate automatically as pressure across the bowl rises. The regulator is the low-pressure type, so it is intended for circuits that hold a working pressure below the standard regulator's range; its exact adjustment range is not published, so confirm it against your setpoint before ordering. A square pressure gauge graduated in psi is fitted, a reverse/check valve is included to hold downstream pressure if the supply is lost, and a mounting bracket is included for panel or frame fixing.
This is a genuine AirTAC part. The GC family is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 to 1 inch, and with choices of drain type, 5 um (W) filtration, gauge style and scale, thread form and check valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC200C08LF2K AirTAC F.R.L. Combination, PT1/4, psi Gauge |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the pneumatic cylinders and actuators on a carton-forming and sealing line, with the check valve holding the set pressure if the plant supply drops.
Conditioning the air that drives sorting gates, stoppers and diverters on a conveyor system, where the lubricator keeps cylinder seals working over long duty cycles.
Supplying treated air to pneumatic clamps and workholding fixtures on a CNC cell, with the low-pressure regulator holding a gentle clamp pressure and the psi gauge giving the operator a direct reading.
Start with the port and size: the 200 size carries a 1/4 inch port, and larger sizes (300/400/600) step up in port and flow capacity, so match the size to the air demand of the circuit rather than only the pipe thread. For this unit the drain is differential-pressure, which suits continuously running lines; an automatic drain (code A) or a manual drain (code M) can be ordered instead if the duty differs. Filtration is the standard 40 um element; specify the W option for 5 um where finer pre-filtration is needed. The gauge here is the embedded square type with a psi scale; MPa or bar scales and an external round gauge are alternatives. Thread is PT as standard, with G (BSPP) and NPT available as order options, and a bracket is included. Note that the regulator in this code is the low-pressure (L) type - choose it only if your setpoint sits in the low-pressure band, and ask us to confirm the range. Because flow is published as curves and not a single rating, send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application - supply pressure, downstream demand and allowable pressure drop - and we will confirm the flow and sizing from the datasheet on request.
The L in the code marks the low-pressure regulator type, intended for circuits whose setpoint sits below the standard regulator band; the exact adjustment range is not published, so confirm it with us before ordering. The filter bowl uses a differential-pressure drain, which discharges collected condensate automatically as the pressure difference across the element rises, with no manual draining required in normal duty.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.