The AirTAC GC200C08LF2WG AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC200C08LF2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator built into one assembled unit, delivering filtered, regulated and oil-mist lubricated compressed air from a single installation point. This size 200 configuration is ported G1/4, carries the 5 um (W) filter element instead of the 40 um standard, drains the filter bowl by differential pressure, and regulates with the low-pressure type regulator fitted with an embedded square gauge scaled in psi. No reverse/check valve is fitted, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600, with port sizes stepping up through the range, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauge scales in MPa, psi or bar, and PT (standard), G or NPT threads to order. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request before you order.
| Model | GC200C08LF2WG AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and atomising air on a paint line, where the 5 um element keeps water and fine particulate out of the finish and the low-pressure regulator holds a gentle, stable setting at the gun.
Supplying the cylinders and air jets that run carton forming, sealing and ejection on a packaging conveyor, with one F.R.L. point giving the whole line clean, regulated, lubricated air.
Conditioning the air for looms and winding heads, where the lubricator maintains a light oil mist for spindles and cylinders and the 5 um filter protects sensitive jet and guide components.
Start with the port step: size 200 with a 1/4 in port suits lighter air demand, and stepping up to 300, 400 or 600 buys larger ports and more flow capacity - match the size to the application rather than upsizing blindly. Choose the drain next: differential-pressure (as fitted here) bleeds the bowl automatically while air flows, automatic (code A) drains even at no flow, and manual (code M) needs someone to press the button. Pick 40 um for general protection or 5 um (this unit) for finer downstream cleanliness. Select the gauge scale (MPa, psi or bar) and thread (PT standard, G or NPT to order), and add or omit the bracket to suit your mounting. One honest routing note: flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering - and because this is the low-pressure regulator type, its adjustment range is not published and should be confirmed on request too.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so there is no one number we can honestly quote. Tell us your application and we will confirm the flow and datasheet figures for this unit on request before you order.
The differential-pressure drain is the default: it bleeds condensate from the filter bowl automatically while air is flowing. If your line has long idle periods with no flow, the automatic drain (code A) is the better choice; if you prefer a physical check, the manual drain (code M) is pressed by hand. All three are real, decodable options across the GC series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.