The AirTAC GC200C08LF2WK AirTAC F.R.L. Combination 1/4 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one compressed-air treatment set. This configuration, GC200C08LF2WK, is the 200 size with 1/4 in PT ports. The filter element is the fine 5 um grade (code W) with a differential-pressure drain, the regulator is the low-pressure type, a square gauge scaled in psi is fitted, and a reverse/check valve (code K) is built in. A mounting bracket is included. The filter and lubricator bowls on the 200 size are PC (polycarbonate); only the 600 size uses an aluminium alloy bowl.
This is a genuine AirTAC part. The GC family is offered across the 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, a choice of PT, G (BSPP) or NPT threads, 40 um standard or 5 um fine filtration, differential-pressure, automatic or manual drains, gauge scale options and standard or low-pressure regulation. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC200C08LF2WK AirTAC F.R.L. Combination 1/4 in PT |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Point-of-use treatment at assembly stations: the filter removes water and 5 um particulate, the low-pressure regulator holds a gentle setpoint for sensitive tools, and the lubricator feeds air cylinders and air motors on the line.
Filtered, regulated and lubricated air for pneumatic clamps and tool-change actuators on a machining centre, with the check valve helping hold the downstream circuit if upstream supply is interrupted.
Supply treatment for the pusher and diverter cylinders on a bottling or carton-packing conveyor, where the lubricator keeps cylinder seals running smoothly and the psi-scaled gauge lets operators check setpoints at a glance.
Start with the size and port: the 200 size with 1/4 in PT ports suits compact supply points, while 300, 400 and 600 sizes step up in port and flow capacity - match the step to the air demand of the circuit rather than guessing. Choose the drain: differential-pressure (as fitted here) drains automatically on pressure differential, while automatic and manual variants are also available. Choose the filter grade: 40 um is the standard element and 5 um (code W, fitted here) is the finer option for more demanding downstream equipment. The regulator is the low-pressure type in this code; the exact adjustment range for the low-pressure version is not published, so confirm it with us. Gauge scale can be MPa, psi or bar - this unit carries the square gauge scaled in psi, and an external round gauge is optional. Thread is PT as standard; G (BSPP) and NPT are catalogue options to order. A bracket is included, and the K code adds a reverse/check valve.
Because flow is published as curves and not a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and air demand and we will confirm the relevant datasheet figures on request before you order.
W is the filter-grade code for the 5 um fine element. The standard GC filter element is 40 um; the 5 um option (fitted in this unit) provides finer particulate removal for more demanding downstream equipment. The drain on this unit is differential-pressure, draining automatically on pressure differential.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.