The AirTAC GC200C08MC2 AirTAC F.R.L. Combination, PT1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one working set. This configuration is the size 200 unit with PT1/4 (1/4 in) ports, PT thread as standard, a 40 um filter element and a manual drain on the filter bowl. The standard regulator lets you set downstream pressure within its 0.05-0.9 MPa (7-130 psi) adjustment range, and the fitted round gauge reads in psi so operators can check the setting at a glance. The lubricator feeds an oil mist into the downstream air for tools and actuators that need it. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and with choices of drain type, filter grade (40 um standard, 5 um optional), gauge style and scale, thread (PT standard, G and NPT as order options) and check valve. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200C08MC2 AirTAC F.R.L. Combination, PT1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds cleaned, regulated and lubricated air to a single CNC machining centre or its pneumatic tool circuit from a 1/4 in drop, with the psi gauge letting the setter verify the regulator setting during shift checks.
Sits at the inlet of a carton-sealing or case-packing conveyor section, removing water and particles, holding a stable set pressure for the cylinders, and misting oil for the air cylinders that cycle all day.
Mounted at a maintenance workbench or assembly-station air outlet, giving each operator a local point to drain collected water by hand, set the working pressure on the psi gauge and lubricate impact tools and air ratchets.
Start with the size and port: the 200 series with PT1/4 ports suits lines plumbed at 1/4 in; step up to 300, 400 or 600 where the pipe and air demand grow. Choose the drain to match how the unit is tended: this model has a manual drain, which needs someone to open it periodically; automatic or differential-pressure drains are available on other codes where the bowl should empty itself. The 40 um element is the standard grade for general plant air; a 5 um element (code W) is available for finer protection. The round gauge on this code reads in psi; square embedded gauges and MPa or bar scales are other options. PT thread is standard, with G (BSPP) and NPT available to order, and a mounting bracket is included. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the datasheet and check the GC200 at PT1/4 against your air demand before you order.
The M in the code gives the filter bowl a manual drain: collected water is emptied by opening the drain by hand at regular intervals. It suits stations that are visited daily. If the unit will be mounted where nobody tends it, ask about automatic or differential-pressure drain versions of the same GC200 set.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.