The AirTAC GC200C08MC2GK AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MC2GK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one filtered, regulated and lubricated air-preparation set. This size 200 unit is decoded for a G1/4 (BSPP) port. The filter section carries the standard 40 um element in a polycarbonate bowl with a manual drain, so an operator drains collected water by hand as part of routine checks. The standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) and this configuration is fitted with an external round pressure gauge reading in psi, plus a reverse/check valve to hold downstream pressure if the supply drops. A mounting bracket is included.
This is a genuine AirTAC part. The GC three-unit F.R.L. line spans sizes 200, 300, 400 and 600 with port sizes from 1/4 in upward, and is orderable with manual, automatic or differential-pressure drains, a 5 um filter element (code W), square or round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC200C08MC2GK AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding a row of pneumatic nutrunners and clamps on a factory assembly line: the filter removes water and particulate from the shop air, the regulator holds a steady working pressure at the drop, and the lubricator mists oil to the air tools.
Supplying the cylinders and air grippers on a carton-forming and sealing conveyor, where the three-unit set cleans the compressed air, keeps line pressure consistent between machine cycles, and lubricates the valve-and-cylinder train.
Mounted at the inlet of a machine's pneumatic control panel, the GC set conditions the whole downstream circuit: one filtered, regulated and lubricated supply point ahead of the directional valves, with the psi gauge giving operators a visible line-pressure check.
Step through the real, decodable choices before ordering. First, size and port: this unit is size 200 with a G1/4 port; larger sizes (300/400/600) step up in port and flow capacity, so match the size to the air demand of the downstream circuit. Second, drain type: this configuration has a manual drain, which suits attended installations; automatic or differential-pressure drains are available if the bowl cannot be drained by hand. Third, filter grade: the standard 40 um element suits general pneumatic supply, while the 5 um option (code W) is there when finer particulate removal is wanted. Fourth, gauge: this unit carries a round psi gauge; embedded square gauges and MPa/psi/bar scales are the other catalogue choices. Thread is G (BSPP) here, with PT as the standard and G/NPT as order options, and a bracket is included.
One honest routing note: AirTAC publishes flow as curves, not as a single rated number, so we cannot quote a rated flow figure for this unit. Send us your application's air demand and operating pressure and we will confirm the sizing against the datasheet curves before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application's air demand and working pressure and we will confirm the sizing against the datasheet curves on request before you order.
This configuration decodes to a manual drain on the filter bowl: collected water is released by hand during routine checks. It suits installations that are visited regularly. If the unit sits in an unattended position, the catalogue alternatives are the automatic drain (code A) or the differential-pressure drain (the default), and the regulator adjustment range differs by drain type: 0.05-0.9 MPa (7-130 psi) with a manual drain, 0.15-0.9 MPa (20-130 psi) with automatic or differential-pressure drains.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.