The AirTAC GC200C08MC2W AirTAC F.R.L. Combination, PT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one set, so the compressed air is cleaned, regulated and lubricated in a single installation. This configuration, GC200C08MC2W, is the size 200 unit with PT1/4 (1/4 in) PT ports. It carries the W-coded 5 um filter element (finer than the standard 40 um), a manual drain on the filter bowl, and an external round pressure gauge with a psi scale on the regulator. The standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C (non-freezing). A mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with matching port sizes, and each unit can be ordered with different drain types, filter grades, gauge scales and thread options (PT standard, with G and NPT as catalogue options). Flow is published by AirTAC as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request before you order.
| Model | GC200C08MC2W AirTAC F.R.L. Combination, PT1/4, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding paint spray guns in a body-shop booth: the 5 um element removes water and particulate that would spoil finish quality, the regulator holds a steady gun pressure, and the lubricator mists oil to keep air tools running smoothly.
Supplying the air clamps, tool-change cylinders and chip-blow-off lines on a small CNC cell: cleaned, regulated and lubricated air at a set pressure keeps clamping force repeatable and protects the machine's pneumatic components.
Feeding the pick-and-place cylinders and sealing jaws on a carton packaging line: the combination keeps moisture and debris out of the valves, holds consistent actuation pressure, and lubricates the cylinders for long shift life.
Start with the size and port: 200/300/400/600 step up in port size and flow capacity, so match the size to the air demand of the downstream equipment - here the size 200 with 1/4 in PT ports suits compact circuits and individual machines. Choose the drain type: manual drain (this unit) needs an operator to drain the bowl, while automatic and differential-pressure drains discharge condensate without attention - pick manual only where someone checks the unit routinely. Choose the filter grade: 40 um is the standard element, 5 um (W code, fitted here) when finer particulate removal matters. Select the gauge scale (MPa, psi or bar) and thread (PT standard; G and NPT orderable). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow number. Tell us your application and air demand and we will confirm the flow figures from the datasheet on request before you order.
In the code GC200C08MC2W, the M selects the manual drain and the W selects the 5 um filter element instead of the standard 40 um. Manual drain means an operator drains the filter bowl periodically; if you want condensate removed automatically, ask about the automatic or differential-pressure drain versions of the same unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.