The AirTAC GC200C08MF2GK AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit, so a single supply line gets clean, regulated, lubricated compressed air. This GC200C08MF2GK is built for a G1/4 (BSPP) port on the 200 size, with a 40 um filter element, a manual drain on the filter bowl, a standard regulator covering 0.05-0.9 MPa (7-130 psi), an embedded square gauge reading in psi, and a reverse/check valve fitted to hold downstream pressure if the supply drops.
This is a genuine AirTAC part. The GC family is available in 200, 300, 400 and 600 sizes with a choice of ports, drain types, 40 um or 5 um filtration, gauge scale, thread (PT standard, G and NPT as order options) and reverse valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC200C08MF2GK AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches and nutrunners at assembly stations: the filter removes water and swarf from the plant supply, the regulator holds a steady setting so torque tools behave consistently, and the lubricator mists oil into the tool air to extend vane and motor life.
Supplying the cylinders and air actuators on a cartoner or case packer: clean, regulated, lubricated air keeps cylinder seals and valve spools working smoothly through long production shifts, and the check valve holds the circuit if the main supply dips.
A wall-mounted service drop in a plant maintenance shop: one F.R.L. unit conditions the air for whatever the technician connects, from grinders to air ratchets, with the psi gauge giving a clear setting and the manual drain emptied as part of routine checks.
Start with the port step: the 200 size here carries a 1/4 in port, and stepping up to 300, 400 or 600 buys larger ports and more flow, so match the size to the air demand of the tools or actuators downstream. Choose the drain to suit attendance: manual drain (as fitted here) needs someone to open it periodically, while automatic and differential-pressure drains empty the bowl without attention. The standard 40 um element suits general plant air; specify the W option for 5 um where finer filtration matters. The embedded square gauge is standard and can be ordered in MPa, psi or bar scale, and PT, G and NPT threads are catalogue options. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a fixed figure. Tell us your line pressure and the air consumption of the equipment downstream, and we will confirm the sizing against the datasheet curves before you order.
Yes. The GC filter section is available with a manual drain (as on this model), an automatic drain, or a differential-pressure drain. Manual suits attended installations where someone checks the bowls routinely; automatic or differential-pressure draining is the better choice for unattended or hard-to-reach positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.