The AirTAC GC200C08MF2WK AirTAC F.R.L. Combination, PT1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator piped together so one connection conditions compressed air completely - removing water and particulate, holding a set downstream pressure, and adding oil mist for air tools and cylinders. This GC200C08MF2WK is built on the size 200 body with a 1/4 in PT port. It carries the fine 5 um filter element (code W), a manual drain on the bowl, a manual-drain regulation range of 0.05-0.9 MPa (7-130 psi) on the standard regulator, an embedded square gauge reading in psi, a fitted reverse/check valve, and the mounting bracket included.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, plus choices of drain type, filter grade, gauge scale and thread (PT standard, G and NPT to order). Published flow data appears only as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | GC200C08MF2WK AirTAC F.R.L. Combination, PT1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding pneumatic gripper circuits on a welding robot: the 5 um element protects fine control valves from particulate and water, the regulator holds a steady set pressure, and the lubricator mists oil for the gripper cylinders.
Conditioning the air supply to stopper and pusher cylinders on a bottling conveyor, where the manual drain lets line operators bleed accumulated condensate at each shift check and the psi gauge gives a quick setpoint readout.
Supplying clamp and vise actuators on a CNC machining centre: filtered, regulated and lubricated air from one 1/4 in connection, with the check valve holding the downstream circuit against supply-side pressure loss.
Start with the port and size step: this unit is size 200 with a 1/4 in PT port; larger sizes (300/400/600) move up to 3/8 in through 1 in ports for higher air demand. Because this build has a manual drain, the regulator gives the wider 0.05-0.9 MPa (7-130 psi) adjustment range - manual drain suits points where an operator can bleed the bowl regularly, while automatic or differential-pressure drains suit unattended installs. The 5 um element (code W) is the finer choice over the standard 40 um for sensitive downstream equipment. The embedded square gauge here reads psi; MPa and bar scales and an external round gauge are alternatives. Thread is PT as standard, with G (BSPP) and NPT available as order options, and the bracket is included.
One honest note on sizing: AirTAC publishes flow for this series as curves, not a single rated figure, so ask us to confirm the flow data against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the flow data from the datasheet on request before you order.
This build uses code M, a manual drain: an operator opens the bowl drain to release collected condensate. On manual-drain units the regulator adjustment range is the wider 0.05-0.9 MPa (7-130 psi). If the installation runs unattended, ask us about automatic or differential-pressure drain versions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.