The AirTAC GC200C08MLC2 AirTAC F.R.L. Combination, PT1/4, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MLC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one set for compressed-air preparation. This 200-size unit is threaded PT1/4 (1/4 in PT; G and NPT are order options). The filter carries the standard 40 um element with a manual drain, and the bowl on the filter section is polycarbonate (PC) at this size. The regulator is the low-pressure type and is fitted with an external round gauge scaled in psi; a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with a choice of port sizes, thread types (PT standard, G or NPT to order), drain types (differential-pressure, automatic or manual), filter grades (40 um standard, 5 um with code W), gauge style and scale, and low-pressure or standard regulator types. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC200C08MLC2 AirTAC F.R.L. Combination, PT1/4, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Installed at a factory air drop to clean water and particulate from the compressed-air line, hold a set low working pressure for downstream equipment, and carry oil mist to the tools and cylinders served by that drop.
Feeding the cylinders and air actuators on a packaging or conveyor line, where the filter protects valves from dirt and water, the regulator sets the operating pressure, and the lubricator mists oil to keep seals and bores working.
Mounted at a workshop bench or cell supply for impact wrenches, grinders and air guns: the 40 um element stops rust and pipe scale, the low-pressure regulator suits circuits run below standard line pressure, and the lubricator extends tool life.
Choose the GC size by the port and flow step you need: this unit is size 200 with a 1/4 in PT port; larger sizes (300/400/600) step up in port and flow capacity. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering. Decodable choices on this configuration: manual drain (drain by hand during stoppages - automatic and differential-pressure drains are available on other codes), the standard 40 um filter element (a 5 um element is available with code W), a low-pressure type regulator (the exact adjustment range for the low-pressure type is not published; we confirm it on request), and an external round gauge scaled in psi (square embedded gauges and MPa/bar scales are the other options). Thread is PT as standard; G (BSPP) and NPT are catalogue options to order, and a mounting bracket is included with this code.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and line conditions and we will confirm the flow and sizing figures from the datasheet on request before you order.
In the code GC200C08MLC2, the M position sets a manual drain: condensate in the filter bowl is drained by hand, which suits installations with regular shutdown checks; automatic and differential-pressure drains are available on other codes. The C2 positions set an external round gauge scaled in psi; an embedded square gauge and MPa or bar scales are the alternative options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.