The AirTAC GC200C08MLC2G AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MLC2G is a three-piece AirTAC GC-series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This configuration is built on the GC200 size with G1/4 (BSPP) ports, a manual drain on the filter bowl, the standard 40 um filter element, a low-pressure regulator type, and a round pressure gauge reading in psi. A mounting bracket is included, and the filter bowl on this size is polycarbonate.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options that include G or NPT thread, automatic or manual drain, a 5 um filter element (code W), gauge scale in MPa, psi or bar, and a reverse/check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us to confirm flow and datasheet figures for your application.
| Model | GC200C08MLC2G AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding carton-sealing cylinders and case-erector actuators on a packaging line: filtered, regulated and lubricated air from one GC set at each machine drop.
Supplying pneumatic clamps, vises and tool-change cylinders on CNC workholding circuits, where the lubricator keeps actuator seals and valves running smoothly.
Air supply for diverter gates, stoppers and pusher cylinders along a conveyor sorting line, with the filter catching pipe scale and the regulator holding a steady setting.
Choose the GC size by port and air demand: this GC200 unit carries G1/4 ports; step up to GC300, GC400 or GC600 for larger ports and higher flow. The filter element here is the standard 40 um grade; specify code W for the 5 um element where finer particulate removal is needed. Drain on this unit is manual, so open it periodically to expel collected water; automatic and differential-pressure drain versions are available in the series. The fitted gauge reads psi, while the embedded square gauge and MPa or bar scales are alternatives. Thread is G (BSPP) on this unit; PT is the standard thread and G/NPT are order options. A mounting bracket is included. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and air demand and we will confirm the flow from the datasheet for this GC200, G1/4 unit before you order.
This unit has a manual drain: open it periodically to expel water collected in the filter bowl. If the installation is hard to reach or left unattended, the GC series is also available with automatic or differential-pressure drains - ask us to quote the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.