The AirTAC GC200C08MLC2GK AirTAC 3-Piece F.R.L. Unit, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator supplied as one matched air-preparation set. This GC200C08MLC2GK is built in the 200 size with a G1/4 (BSPP) port. The filter stage carries the standard 40 um element with a manual drain on its bowl (polycarbonate on the 200 size; only the 600 size uses aluminium alloy). The regulator is the low-pressure type, fitted with an external round gauge scaled in psi, and a reverse (check) valve is included. A mounting bracket is supplied. The set is rated for compressed air at up to 1.0 MPa (145 psi) inlet and -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family spans the 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, and options that include automatic or differential-pressure drains, a 5 um filter element (code W), gauge style and scale, G or NPT threads in place of the PT standard, and bracket variations. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200C08MLC2GK AirTAC 3-Piece F.R.L. Unit, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted applicators on a paint line, where filtered, regulated and lightly oiled air keeps finishes clean and gun seals lubricated. The low-pressure regulator suits circuits that run at reduced set points rather than full shop pressure.
Supplying pneumatic clamps and vise cylinders on a machining centre: the filter stage strips water and dirt before the valves, the fitted check valve helps hold the circuit if supply dips, and the lubricator mists the cylinder seals.
Running the stopper, pusher and lift cylinders along a bottling or packaging conveyor, where one regulator set point controls the whole section and the manual drain fits a shift-based maintenance routine.
Every choice in this set is decodable from the code. Step the size first: 200, 300, 400 and 600 move up in port and flow capacity, so match the size to the air demand of the machine rather than the pipe alone. Choose the drain: manual (this unit, code M) needs periodic bleeding, while automatic and differential-pressure drains handle it for you. Filter grade is 40 um standard or 5 um with W. Gauge style is embedded square or external round, scaled in MPa, psi or bar (this unit: round, psi). Thread is PT as the standard with G and NPT as orderable options, and the bracket can be omitted with J. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the flow and sizing from the datasheet on request.
It marks the low-pressure regulator type. The exact adjustment range for the low-pressure version is not published in the standard tables, so we confirm it from the datasheet on request. The rest of the code decodes normally: G1/4 port, manual drain (M), round psi gauge (C2) and a fitted reverse/check valve (K).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.