The AirTAC GC200C08MLC2WGK AirTAC F.R.L. Combination G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled to condition compressed air in one station. This GC200C08MLC2WGK is the size 200 unit with a G1/4 (BSPP) port. It carries the 5 um filter element (code W) instead of the standard 40 um grade, a manual drain on the filter bowl, a low-pressure type regulator, and a round pressure gauge reading in psi. A reverse/check valve is fitted, and the mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, thread options (PT standard; G and NPT to order), drain types, filter grades and gauge scales. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet for your application before ordering.
| Model | GC200C08MLC2WGK AirTAC F.R.L. Combination G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated and lubricated air to clamps, chucks and tool-change cylinders on a CNC or turning centre, with the 5 um element protecting fine-valve pilot circuits.
Conditioning the air supply for diverters, pushers and stopper cylinders along a packaging or conveyor line, with the lubricator keeping actuator seals running smoothly.
Serving a bench or assembly cell where impact tools and air cylinders share one drop: the regulator holds a steady working pressure and the lubricator mists oil downstream.
Start with the size and port: 200 through 600 steps up both port size and flow capacity, so match the size to the air demand of the downstream circuit; this unit is size 200 with G1/4. Choose the drain type where it applies: manual drain needs an operator to bleed the bowl, automatic and differential-pressure drains discharge condensate on their own. Filter grade is 40 um standard or 5 um with code W, as fitted here. Gauge scale is MPa, psi or bar, and the round external gauge is optional against the embedded square standard. Thread is PT as standard with G and NPT as orderable options; brackets are available where listed. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and we will confirm the flow and datasheet figures for this exact unit on request before you order.
The M in the code sets a manual drain: the filter bowl is bled by hand instead of discharging condensate automatically, which suits stations that are checked as part of a routine. The L sets the low-pressure regulator type; its exact adjustment range is not published in the material we hold, so confirm the range with us for your set pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.