The AirTAC GC200C08MLC2WK AirTAC F.R.L. Combination 1/4 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MLC2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This 200-size unit is threaded PT1/4 (1/4 in, PT as standard, with G and NPT available as order options) and is built as a low-pressure regulator type. The filter element is the fine 5 um grade (the 40 um standard element is the usual alternative) with a manual drain, so the bowl is emptied by opening its drain by hand as part of routine maintenance. A round external gauge scaled in psi is fitted for setting and monitoring downstream pressure, a reverse/check valve is included, and a mounting bracket is supplied.
This is a genuine AirTAC part. The GC family spans the 200, 300, 400 and 600 sizes with port sizes stepping up from 1/8 in to 1 in, so the same combination concept is available in larger flows and ports if your line grows. Max working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published by AirTAC as curves rather than a single rated figure, so ask us to confirm the datasheet figures for this exact configuration before you order.
| Model | GC200C08MLC2WK AirTAC F.R.L. Combination 1/4 in PT |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding clamps and swing cylinders on a CNC machining cell, where the 5 um element protects the valves from particulate and water, the regulator holds a steady clamp pressure on the psi gauge, and the lubricator keeps the actuator seals working.
Supplying the air cylinders and grippers on a bottling or carton-packing line, where one 1/4 in F.R.L. point gives the whole station filtered, regulated and lubricated air and the check valve holds the circuit if supply dips.
Feeding impact wrenches and air ratchets at a plant maintenance bench, where the oil-mist lubricator carries oil mist into the tools with every use, the regulator sets safe working pressure, and the manual drain is emptied at shift checks.
Start with the port and size step: this unit is the 200 size with a 1/4 in PT port, the smallest step in the GC range - step up to 300/400/600 and larger ports if your air demand is higher, since flow capacity rises with size. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering. The choices decoded into this code are the ones you can vary: filter grade (40 um standard vs the 5 um fine element fitted here), drain type (manual here, with automatic and differential-pressure options on the family), gauge scale (this one is a round gauge in psi; MPa and bar scales and the embedded square gauge are alternatives), thread (PT standard, G and NPT to order), and the reverse/check valve and bracket, both included here. Note this is the low-pressure regulator type; its exact adjustment range is not published in the material we hold, so confirm it with us for your set pressure.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as performance curves, not as a single rated figure, so we do not quote one number here. Tell us your working pressure and the air demand of the equipment you are feeding, and we will confirm the sizing from the datasheet curves for this exact 200-size, 1/4 in configuration before you order.
This unit has a manual drain: collected water is released by opening the drain by hand, so it suits installations that are checked regularly. The GC family also offers an automatic drain and a differential-pressure drain on the filter bowl if you would rather not rely on manual attention. Also note this is the low-pressure regulator type, so confirm its adjustment range with us if your set pressure is outside the ordinary range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.