The AirTAC GC200C08MLF2GK AirTAC F.R.L. Combination Unit G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MLF2GK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one F.R.L. set. This configuration is built around 1/4 in (G1/4) ports and carries a 40 um filter element with a manual drain, a low-pressure type regulator with an embedded square gauge scaled in psi, and a fitted reverse (check) valve so downstream settings hold if the supply drops. A mounting bracket is included for panel or wall fixing.
This is a genuine AirTAC part from the GC family, which spans the 200 / 300 / 400 / 600 size steps with port options from 1/8 in up to 1 in, thread choices of PT (standard), G and NPT, drain choices, 40 um or 5 um (W) filtration, gauge scales in MPa, psi or bar, and an optional external round gauge. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC200C08MLF2GK AirTAC F.R.L. Combination Unit G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
A small assembly press fed from a shop-air drop needs cleaned, regulated and lubricated air at a modest flow. This 200-size three-unit set filters water and particulate at 40 um, holds the regulator setting with its check valve, and mists oil to the cylinder seals - all at a 1/4 in port size that suits compact manifolds.
Carton-forming and case-sealing conveyors run many small cylinders continuously. A three-unit F.R.L. at each line section keeps moisture out of the valves, holds a steady low supply pressure, and carries oil mist downstream so cylinder and actuator seals last through long production shifts.
Paint and coating spray guns are sensitive to water and rely on consistent, lubricated air at moderate pressure. This combination unit conditions the gun feed in one assembly: 40 um filtration, a low-pressure regulator with a psi gauge the operator can read at a glance, and oil misting for the gun's air motor.
Start with the size step: 200 units sit at the small end of the GC range, and moving up to 300, 400 or 600 buys larger ports and more flow capacity - match the step to the air demand of the downstream circuit rather than to the pipe alone. Drain choice matters: this unit uses a manual drain, which suits positions an operator visits routinely; automatic (A) or differential-pressure (blank) drains suit unattended installations. Filtration is 40 um as standard here; specify the W code for 5 um where finer pre-filtration is needed. The fitted square gauge reads in psi; MPa and bar scales are the other catalogue options, and an external round gauge can be added. Thread is G (BSPP) on this code, with PT as the standard alternative and NPT also available to order. Note that the regulator in this configuration is the low-pressure type; its exact adjustment range is not published on our sheet, so confirm it with us. Flow is published as curves, not a single rating - ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote one number. Send us your application details - downstream air demand, working pressure and duty - and we will confirm the datasheet figures and check the 200 size against your requirement before you order.
The M in the code specifies a manual drain on the filter bowl: condensate is released by hand when an operator opens it. That suits stations visited routinely as part of maintenance rounds. If the unit will sit unattended, the catalogue also offers automatic (A) and differential-pressure (blank) drains on the same GC200 body - tell us your installation and we will confirm the right variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.