
The AirTAC GC30010LC2WT AirTAC F.R.L. Combination, NPT3/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC30010LC2WT is a three-piece F.R.L. combination that conditions compressed air in one assembly: a filter removes water and particulate down to 5 um, a low-pressure regulator holds the downstream setting, and a lubricator adds oil mist for downstream air tools and cylinders. This unit is built on the 300 size with a NPT3/8 (3/8 in) port, NPT thread, and a polycarbonate bowl on the filter section. The differential-pressure drain bleeds accumulated condensate automatically as pressure across the bowl builds, and the fitted round gauge reads the regulated pressure in psi.
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with port options from 1/8 in to 1 in, drain choices (differential-pressure, automatic or manual), 40 um standard or 5 um fine filtration, gauge and thread options, and standard or low-pressure regulator types. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | GC30010LC2WT AirTAC F.R.L. Combination, NPT3/8, 5 um |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted applicators on a finishing line, where the 5 um element protects the guns from water and particulate and the lubricator keeps valve spools moving smoothly.
Conditioning the air feeding cylinder-actuated carton sealers and case packers, with the low-pressure regulator holding a gentle setting for light-duty actuators and the psi gauge giving operators a visible setpoint.
Supplying filtered, regulated and lubricated air to bench-top test rigs and small pick-and-place cells, where fine 5 um filtration protects sensitive pneumatic components downstream.
Start with the port step: the 300 size carries a 3/8 in port, one step up from 1/4 in and one down from 1/2 in, so match it to the line size and the flow your circuit needs. This configuration is the low-pressure regulator type, so confirm the working band suits your circuit before ordering. The 5 um element (code W) suits finer protection than the 40 um standard; the differential-pressure drain handles condensate without a manual routine, and the round psi gauge gives a direct regulated-pressure readout. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Because flow for this series is published as curves and not as a single rated figure, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a number. Tell us your line size and application and we will confirm the flow data from the datasheet on request.
The L code in GC30010LC2WT marks the low-pressure regulator type rather than the standard type, so it is intended for circuits working at lower pressures. The exact adjustment range for the low-pressure type is not published in our sheet, so confirm your working pressure with us and we will verify suitability on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.