verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure

The AirTAC GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/2"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$136.04 $143.54Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-15 drain, gauge and thread option on one page All GC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure

The GC30015ALF2TK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one set, so compressed air is cleaned of water and particulate, held at a set working pressure, and carrying a fine oil mist to downstream equipment. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter section carries the standard 40 um element with an automatic drain that expels collected condensate without manual attention, the regulator is the low-pressure type with a fitted square gauge scaled in psi, and a reverse/check valve is fitted to hold the downstream circuit against backflow.

This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with matching port steps, and options include manual or differential-pressure drains, a 5 um filter element (code W), gauge scale choices and G or NPT threads. Flow figures for this series are published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.

GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure Technical Specifications

ModelGC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeFitted — square, psi scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure

GC300G-series F.R.L. combination, 300 body — sets the port range.
15Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/2" · 40 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-15
Build orderFilter → regulator → lubricator

Where the GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure Is Used

factory

Automated assembly cell air supply

Feeding cleaned, regulated and lubricated air to the cylinder and valve manifold bank of a production assembly cell, with the automatic drain handling condensate during multi-shift running.

conveyor_belt

Packaging line pneumatic drives

Supplying the air cylinders and grippers on a carton-forming and sealing conveyor line, where the low-pressure regulator holds a stable working pressure and the lubricator keeps actuation smooth.

precision_manufacturing

Machine-tool pneumatic clamping

Conditioning the air feed to a CNC machine tool's clamping and tool-change circuits, with the 40 um filter protecting valves and the check valve holding the clamp circuit against supply backflow.

Is the GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure the Right Station?

Start with the port step: size 300 gives a NPT1/2 connection, and moving up or down a size changes both the port and the flow capacity, so match the size to the air demand of the machine rather than only the pipe thread. The drain choice matters in practice: automatic drain (this model) suits unattended or hard-to-reach installations, manual drain suits regularly serviced stations, and the differential-pressure type is the default. The standard element is 40 um; specify code W for the 5 um grade where finer filtration is needed. Gauge scale is selectable (MPa, psi or bar) and this unit ships with the square gauge in psi. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Flow for this series is published as curves, not a single rated figure, so please ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.

GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure FAQ

AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and the air demand of your equipment and we will confirm the correct size from the datasheet on request.

The A in the code specifies the automatic drain on the filter bowl: collected condensate is expelled without operator attention, which suits unattended installations. The GC family is also available with a manual drain or the differential-pressure (default) drain - just order the corresponding code.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC30015ALF2TK AirTAC F.R.L. Unit, NPT1/2, Low-Pressure

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC30015ALF2TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.