
The AirTAC GC30015LF2WT AirTAC F.R.L. Combination, NPT1/2, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30015LF2WT is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter uses a differential-pressure drain, the regulator is the low-pressure type with an embedded square gauge scaled in psi, and the lubricator delivers oil mist downstream to keep air tools and cylinders running. The polycarbonate bowls suit the -5 to 70 C (non-freezing) operating range, and maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um (W) filtration, differential-pressure, automatic or manual drains, gauge scale options, three thread types (NPT on this code), and bracket options. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC30015LF2WT AirTAC F.R.L. Combination, NPT1/2, 5 um |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Feeds workstation drops on an automotive assembly line with filtered, regulated and oil-mist lubricated air, so impact wrenches and clamping cylinders receive clean air and consistent lubrication at each station.
Supplies carton-sealing and case-packing cylinders on a packaging conveyor with air cleaned to 5 um, held at a stable low-pressure setpoint and carrying oil mist, protecting seals through continuous shift running.
Conditions the shop-air feed to a CNC machining centre, removing water and fine particulate before the air reaches tool-changer cylinders and spindle air seals, with the square psi gauge for setpoint checks.
Start with the size and port: 200, 300, 400 and 600 step up in port and flow capacity, so match the step to the air consumption of the machines downstream - here the size 300 with NPT1/2 covers 1/2 in lines. Choose the filter grade: 40 um is the standard element, while the 5 um (W) element fitted to this model suits finer protection for valves and cylinders. Pick the drain type - differential-pressure (default), automatic or manual - and the gauge scale (MPa, psi or bar); this unit carries the embedded square gauge scaled in psi with an external round gauge available as an option. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow for this series is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and the air consumption of the equipment downstream, and we will confirm the sizing from the datasheet on request before you order.
The W in the code GC30015LF2WT selects the optional 5 um element in place of the standard 40 um grade. The finer element removes smaller water and particulate contamination, which suits downstream valves, cylinders and air tools that need cleaner air. If your application is content with coarser filtration, the standard 40 um grade is available in the same size.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.