
The AirTAC GC30015MC2WT AirTAC F.R.L. Combination, NPT1/2, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC30015MC2WT is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one filtered, regulated and lubricated air-preparation set. This configuration is the size 300 unit with a NPT1/2 (1/2 in) NPT thread, a manual drain on the filter bowl, a fine 5 um filter element (the 40 um element is the standard alternative), a fitted external round gauge reading in psi, and a mounting bracket included. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the working temperature range is -5 to 70 C (non-freezing). The bowls on the 300 size are polycarbonate (PC).
This is a genuine AirTAC part sold by a distributor for the US market. The GC series spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and options include automatic, manual or differential-pressure drains, a 5 um or 40 um filter grade, gauge style and scale, G (BSPP) or NPT threads in place of the NPT standard, and a reverse/check valve. Flow is published by AirTAC as curves rather than a single rated figure, so we confirm the datasheet figures for your application on request.
| Model | GC30015MC2WT AirTAC F.R.L. Combination, NPT1/2, 5 um |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches, nut runners and air ratchets at a vehicle assembly station, where the 5 um element protects the tools from water and particles, the regulator holds a steady set pressure, and the lubricator carries oil mist downstream to the tool motors.
Conditioning the supply air to a packaging line's directional valves and pneumatic actuators, with the regulator holding the set pressure the valve stack was sized for and the lubricator maintaining film on the cylinder seals along the conveyor.
Supplying clean, regulated and lubricated air to a bench-top test rig or pilot-operated fixture, where the fine 5 um grade and the round psi gauge let the operator set and read the working pressure directly at the bench.
Choose the size and port step against the air demand of the circuit: the GC series steps through sizes 200, 300, 400 and 600, with this 300 size carrying a NPT1/2 (1/2 in) port. Because flow is published as curves and not as a single rated number, ask us to confirm sizing against your application before ordering. On this unit the drain is manual, which suits installations where an operator can bleed the bowl at intervals; automatic and differential-pressure drains are available in the series if unattended water removal is preferred. The filter grade here is the fine 5 um element (code W); the standard 40 um element is the choice where only coarse water and particle removal is needed. The gauge fitted is an external round gauge with a psi scale; an embedded square gauge is standard on the series and MPa or bar scales can be ordered. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order. A mounting bracket is included with this code.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and we will confirm the flow and datasheet figures for this exact model on request before you order.
The M in GC30015MC2WT decodes to a manual drain on the filter bowl: an operator opens it periodically to expel collected water. If the installation runs unattended, the GC series also offers automatic (code A) and differential-pressure (blank) drains on the same size and port, and we can quote the equivalent code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.