verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um

The AirTAC GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/2"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$122.34 $129.84Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-15 drain, gauge and thread option on one page All GC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um

The GC30015MC2WTK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 3-piece set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter element is the 5 um grade (code W) for finer particulate removal than the 40 um standard, the bowl drain is the manual type, and the regulator is the standard type with a manual-drain adjustment range of 0.05-0.9 MPa (7-130 psi). A round psi-scale gauge is fitted, a reverse/check valve is included, and the mounting bracket is supplied. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The filter and lubricator bowls are PC (polycarbonate) at this size.

This is a genuine AirTAC part. The GC family is published in four sizes (200, 300, 400 and 600) with ports from 1/8 to 1 inch, drain choices (differential-pressure, automatic or manual), filter grades (40 um standard, 5 um optional), gauge styles and scales, and G/NPT thread options. Flow is published only as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.

GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um Technical Specifications

ModelGC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/2" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — round, psi scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um

GC300G-series F.R.L. combination, 300 body — sets the port range.
15Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/2" · 5 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-15
Build orderFilter → regulator → lubricator

Where the GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um Is Used

factory

Automotive paint and finishing lines

Feeds clean, regulated and lubricated air to spray guns and air-assisted applicators, where the 5 um element helps protect finish quality and the regulator holds a steady gun pressure.

precision_manufacturing

CNC machine tool air supply

Conditions the shop-air feed to machining centres and lathes, filtering water and chips of particulate, regulating the supply to actuator and tool-change circuits, and oil-mist lubricating air cylinders.

conveyor_belt

Packaging and case-sealing machinery

Supplies treated air to carton formers, sealers and palletiser cylinders, with the manual-drain bowls emptied at shift checks and the psi gauge giving operators a visible setpoint.

Is the GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um the Right Station?

Size and port step up with required flow: 200, 300, 400 and 600 correspond to larger ports (here 1/2 in NPT) and higher flow capacity, so match the size to the air demand of the machine or line. For this family the real choices are: drain type (manual, as coded here, versus automatic or differential-pressure), filter grade (40 um standard versus 5 um with W), gauge style and scale (the embedded square gauge is standard; the external round gauge fitted here reads psi; MPa and bar scales are also available), thread (NPT on this code), and whether the reverse/check valve (K) is wanted. A bracket is included on this unit.

Because AirTAC publishes flow only as curves and not as a single rated figure, ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.

GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um FAQ

AirTAC publishes flow for the GC series only as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and datasheet figures for this unit on request before you order.

The M code means the filter bowl is emptied by hand at service intervals instead of draining automatically; automatic and differential-pressure drains are available on other codes in the family. The W code selects the 5 um element rather than the 40 um standard, for finer filtration of water and particulate ahead of the regulator and lubricator.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC30015MC2WTK AirTAC F.R.L. Combination, NPT1/2, 5 um

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC30015MC2WTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.