
The AirTAC GC40010ALC2WTK AirTAC F.R.L. Unit NPT3/8, 5 um, Auto Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC40010ALC2WTK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This configuration is size 400 with a NPT3/8 (3/8 in) port and NPT thread. The filter stage carries the 5 um element (code W) for finer water and particulate removal than the standard 40 um grade, and its bowl is fitted with an automatic drain, so condensate is expelled without manual attention. The regulator is the low-pressure type and is supplied with an external round gauge on a psi scale; a reverse/check valve (code K) is fitted. The bowls on this size are PC (polycarbonate).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades, gauge styles and scales, and G or NPT thread options to order. Flow is published in the catalogue as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GC40010ALC2WTK AirTAC F.R.L. Unit NPT3/8, 5 um, Auto Drain |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 5 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Feeds a packaging machine's valve islands and cylinders with filtered, regulated and lubricated air, with the 5 um element and automatic drain protecting downstream components on a continuously running line.
Supplies a low-pressure pneumatic press or clamping station from a shop-air drop, with the regulator holding the working pressure the tooling needs and the lubricator mist-oiling the cylinder seals.
Prepares air for conveyor diverters, gates and stopper cylinders, where the automatic drain handles condensate from humid plant air and the psi gauge lets technicians set and verify the line pressure.
Choose the GC series when a line needs filtration, regulation and lubrication as three separate, serviceable stages. Step through sizes 200/300/400/600 against the port and the flow your line needs - this unit is size 400 with a NPT3/8 port. The 5 um element (code W) suits points where finer particulate and water removal matter; the standard grade is 40 um. The automatic drain on this unit keeps the bowl clear without manual intervention; manual and differential-pressure drains are the other catalogue choices. The fitted round gauge reads in psi; embedded square gauges and MPa/bar scales are the alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes flow for the GC series as curves in the catalogue, not as a single rated figure, so we do not quote a number. Tell us your application and we will confirm the flow and datasheet figures for this unit on request before you order.
The code decodes them: A is the automatic drain, which expels collected condensate from the filter bowl without manual attention, and W is the 5 um filter element, one grade finer than the 40 um standard. Both are catalogue choices on the GC series, so you can order the same unit with a manual or differential-pressure drain and the 40 um element if that suits the point of use better.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.