
The AirTAC GC40010MC2T AirTAC GC F.R.L. Combination, NPT3/8, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC40010MC2T is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter and lubricator bowls are polycarbonate at this size, the filter drains manually, and the set is supplied with a round pressure gauge reading in psi plus a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC400 series is one of four sizes (200/300/400/600) with port sizes from 1/8 in to 1 in, and options include a 5 um filter element (code W), automatic or differential-pressure drain, G (BSPP) or NPT threads, and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC40010MC2T AirTAC GC F.R.L. Combination, NPT3/8, Manual Drain |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Feeds cleaned, regulated and lubricated air to the tool-change cylinders, clamps and chip-ejection actuators on a machining centre, with the psi gauge giving operators a direct reading at the machine.
Serves as the air-preparation set for a packaging line's conveyor stops, case-forming cylinders and carton-sealing heads, where the manual drain suits a line that is attended each shift.
Installed at the wall drop feeding a manual assembly bench, so filtered, pressure-set and lubricated air reaches the bench's air tools and small cylinders from a single 3/8 in supply point.
Start with the port and flow step: the 400 size with 3/8 in ports sits mid-range in the GC line, one step above the 300 size and one below the 600, so step up or down if your line's flow demand points to a different size - we confirm the published flow curves against your application before you order. This unit has a manual drain, so someone must open the drain periodically; if the installation is unattended, ask about the automatic (A) or differential-pressure drain versions. The 40 um element is the standard grade; specify the W code if you need 5 um filtration. The round gauge on this unit reads in psi, and MPa or bar scales are alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your application's flow and pressure requirements and we will confirm the sizing from the datasheet on request.
The M in the code GC40010MC2T means the filter drains manually: an operator opens the drain periodically to remove collected water. If the unit will be installed where nobody attends it, the same GC400 size in 3/8 in is available with an automatic (A) or differential-pressure drain instead - just ask and we will decode the right variant with you.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.