
The AirTAC GC40010MF2T AirTAC F.R.L. Combination, NPT3/8, 40 um, psi is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC40010MF2T is a genuine AirTAC three-unit F.R.L. combination that filters, regulates and lubricates compressed air in one coordinated set: a separate filter, a separate regulator and a separate lubricator on a common assembly. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The fitted square gauge reads in psi, and the polycarbonate bowls suit the -5 to 70 C (non-freezing) operating range at up to 1.0 MPa (145 psi) maximum inlet pressure.
This is a genuine AirTAC part in the GC series, which spans sizes 200, 300, 400 and 600 with port options from 1/8 to 1 inch, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um (W) filter grades, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures for your application on request.
| Model | GC40010MF2T AirTAC F.R.L. Combination, NPT3/8, 40 um, psi |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Feeds cleaned, regulated and lubricated air to the tool-change cylinders and clamping fixtures on a CNC machining centre, with the psi gauge giving operators a local setpoint readout at the machine.
Supplies filtered, pressure-controlled, oil-misted air to the pneumatic cylinders and grippers on an assembly line, with the manual drain bled during scheduled shift checks.
Conditions the air feeding conveyor diverters, case sealers and palletiser cylinders in a packaging plant, protecting the valves and actuators from water and particulate carryover.
Start with the port and size step: the 400 size with NPT3/8 ports sits in the middle of the GC range, so step up to 600 or down to 300/200 depending on the pipe size and the air demand of the downstream circuit. Choose the drain type next: this unit has a manual drain, which suits attended installations where an operator can bleed the bowl; pick automatic or differential-pressure drain codes for unattended lines. Filter grade is the standard 40 um here, with the W code giving 5 um where finer particulate removal is needed. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A mounting bracket is included.
Because flow is published as curves and not as a single rated number, ask us to confirm the sizing against your application before ordering - we will supply the datasheet figures on request.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the relevant flow and sizing figures from the datasheet on request before you order.
The M in the code GC40010MF2T specifies a manual drain on the filter bowl: condensate is removed by opening the drain valve during routine checks. If the unit will sit on an unattended line, the catalogue also offers automatic (A) and differential-pressure (blank) drain versions of the same combination.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.