verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC600 · F.R.L. Combination (filter + regulator + lubricator)

GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4

The AirTAC GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT3/4"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$238.79 $246.29Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC600-20 drain, gauge and thread option on one page All GC600-20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4

The GC60020MC2WT is an AirTAC GC600 three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. It cleans compressed air of water and particulate down to 5 um (the fine W grade, finer than the standard 40 um element), regulates downstream pressure across 0.05-0.9 MPa (7-130 psi) with the standard regulator, and adds oil-mist lubrication for downstream air tools and actuators. This configuration has 3/4 inch NPT ports, a manual drain on the filter bowl, a fitted round gauge reading in psi, and no reverse/check valve. The maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). At size 600 the filter bowl is aluminium alloy.

This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 inch to 1 inch, and can be ordered with automatic, manual or differential-pressure drains, 40 um or 5 um filtration, embedded square or external round gauges in MPa, psi or bar scales, and G (BSPP) or NPT threads in place of the NPT standard. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.

GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4 Technical Specifications

ModelGC60020MC2WT AirTAC F.R.L. Combination, NPT3/4
SeriesGC600 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT3/4" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialAluminium alloy
Pressure gaugeFitted — round, psi scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4

GC600G-series F.R.L. combination, 600 body — sets the port range.
20Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC600 · PT3/4" · 5 µm
One size downGC400
Two-unit equivalentGFC600-20
Build orderFilter → regulator → lubricator

Where the GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4 Is Used

precision_manufacturing

CNC machining centre air supply

Feeds clean, regulated and lubricated air to the tool-changer, clamps and pneumatic actuators on a machining centre, protecting the machine's air circuit from water, chips-grade particulate and wear.

conveyor_belt

Packaging line actuation

Prepares the air feeding cylinder-driven carton formers, sealers and case packers on a packaging line, holding a stable set pressure while the lubricator keeps cylinder seals and valves running smoothly.

factory

Plant-wide tool air drops

Serves as the main F.R.L. set on a workshop air drop supplying impact wrenches, air ratchets and other lubricated hand tools, with the 5 um element guarding downstream valves from fine contamination.

Is the GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4 the Right Station?

Size and port step up together: 200, 300, 400 and 600 cover ports from 1/8 inch to 1 inch, so pick the size whose flow curve covers your demand at working pressure - we will check the curve against your application on request. This unit is already set for the 600 size with 3/4 inch NPT ports. Drain choices on the filter are manual (as fitted here), automatic, or differential-pressure; manual suits supervised installations where an operator drains the bowl on schedule. Filtration is 5 um on this code (the W grade) versus the 40 um standard - choose 5 um for downstream equipment that needs finer air. The gauge here is the external round type reading psi; embedded square gauges and MPa or bar scales are alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Flow is published as curves, not a single rating, so please ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.

GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4 FAQ

AirTAC publishes flow for the GC series as curves rather than a single rated figure, so no single flow number is quoted here. Send us your line pressure and air demand and we will confirm the sizing from the datasheet on request.

In the code GC60020MC2WT, the M sets a manual drain on the filter bowl - an operator opens it to expel collected water - and the W sets the 5 um filtration grade, finer than the 40 um standard element. Automatic or differential-pressure drains and the 40 um grade are available on other codes in the same series.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC60020MC2WT AirTAC F.R.L. Combination, NPT3/4

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC60020MC2WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.