The AirTAC GFR200C06 NPT1/8 AirTAC Filter Regulator, 40 um, Bar Gauge is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06JC3T is a 200-size filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure steady. This configuration is built around a 1/8 in NPT port, a 40 um standard filter element, and a differential-pressure drain that bleeds collected condensate automatically whenever the pressure drop across the element rises. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and a round external gauge on a bar scale is fitted so the set pressure can be read at a glance. No mounting bracket is included with this code, and the maximum inlet pressure is 1.0 MPa (145 psi) with a working temperature of -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR filter-regulator line runs from size 200 up to 600, with larger port sizes, optional 5 um (code W) filtration, automatic or manual drains, square or round gauges on MPa, psi or bar scales, a low-pressure regulator option, a reverse/check valve option, and PT, G or NPT threads. Flow figures for this unit are published as curves rather than a single rating, so ask us and we will confirm the datasheet numbers for your application on request.
| Model | GFR200C06 NPT1/8 AirTAC Filter Regulator, 40 um, Bar Gauge |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds a compact clamping cylinder circuit on a bench-top assembly press: the 40 um element keeps scale and pipe debris out of the cylinder seals while the regulator holds a fixed clamping pressure so every cycle seats the part consistently.
Mounted ahead of the solenoid valve manifold on a carton-sealing or labelling machine, it strips condensate and grit that would otherwise score valve spools, and locks the supply pressure the valve stack and actuators were sized for.
Supplies clean, regulated air to pneumatic actuators and sample-handling cylinders on a laboratory or pilot-plant skid, where the bar-scale gauge lets an operator verify set pressure during calibration checks and the differential drain keeps moisture off sensitive components.
Start with the port step: this unit is 1/8 in NPT on the 200 frame, and the GFR line steps up through 200/300/400/600 with larger ports and higher flow capacity - pick the size whose flow curve covers your demand rather than oversizing blindly. Drain choice matters in use: differential-pressure (this unit) drains on pressure drop, automatic (code A) drains on a timer-free cycle, and manual (code M) needs someone to open it; the manual-drain variant also widens the regulation range down to 0.05 MPa. Filtration is 40 um standard; specify W for 5 um where finer protection is needed. Gauge options are the embedded square type or an external round gauge, with MPa, psi or bar scales - this code carries a round bar-scale gauge. Thread is NPT here; PT is the standard catalogue thread and G (BSPP) is also orderable. Brackets are optional (this code omits one).
One honest note before ordering: AirTAC publishes flow for this family as curves, not as a single rated figure, so send us your air demand and we will confirm the correct size against the datasheet before you commit.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote one number. Tell us your air demand and line conditions and we will confirm the correct size against the datasheet curves on request before you order.
The differential-pressure drain (the default on this code) discharges condensate automatically when the pressure drop across the 40 um element rises, with no operator action. Choose code A for automatic draining on a fixed cycle, or code M for manual draining where an operator is on site - note the manual-drain version also extends the regulation range down to 0.05 MPa (7 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.