The AirTAC GFR200C06C2 AirTAC Filter Regulator 1/8 in PT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06C2 is an AirTAC GFR200 filter regulator: filtration and pressure regulation combined in one body. It removes water and particulate from compressed air at the 40 um standard grade, drains collected condensate automatically by differential pressure, and regulates downstream pressure across 0.15-0.9 MPa (20-130 psi). This configuration is PT 1/8 in ported, size 200, with a round pressure gauge reading in psi, a mounting bracket included, and no reverse/check valve fitted. The polycarbonate bowl suits the -5 to 70 C non-freezing operating range, with a maximum inlet pressure of 1.0 MPa (145 psi).
This is a genuine AirTAC part from the GFR filter-regulator line, which spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, PT, G or NPT threads, automatic, manual or differential-pressure drains, a 5 um fine-grade option (code W), gauge scale choices and a low-pressure regulator variant. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200C06C2 AirTAC Filter Regulator 1/8 in PT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clamps and small actuator circuits at an individual workstation, where one compact 1/8 in unit filters the shop air and holds a set working pressure for repeatable clamping.
Supplying cleaned, regulated air to blow-off nozzles and diverting cylinders on a food or carton packaging line, with the differential-pressure drain clearing accumulated water between runs.
Conditioning supply air for gauges, sensors and small pneumatic controls on a test bench, where the psi-scaled round gauge gives a direct local reading and the 40 um element keeps particulates out of sensitive components.
Start with the port step: this unit is 1/8 in PT, and the GFR range steps up through 1/4, 3/8, 1/2, 3/4 and 1 in as the size number rises from 200 to 600 - pick the size whose flow curve covers your demand with margin. Drain type is a real choice: differential-pressure (this unit) drains only when the pressure drop across the element is high enough; automatic suits unattended duty; manual suits periodic checks. Filter grade is 40 um standard or 5 um (code W) for finer protection. Gauge scale is selectable (MPa, psi or bar) and this unit carries the external round gauge in psi; a reverse/check valve is available as an option. PT is the standard thread, with G and NPT as orderable alternatives, and a bracket is included.
Because AirTAC publishes flow only as curves and not as a single rated figure, send us your line pressure and air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated number, so we do not quote a figure that is not in the datasheet as a rating. Send us your inlet pressure and air demand and we will confirm the flow curve and sizing for this 1/8 in, size 200 unit on request before you order.
The code has no drain letter, so the bowl drains by differential pressure: condensate is discharged only when the pressure drop across the filter element builds high enough. If you prefer continuous unattended draining or a manual drain valve, the same GFR200 body is available with automatic (code A) or manual (code M) drains - tell us and we will quote the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.