The AirTAC GFR200C06C2T AirTAC Filter Regulator, NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06C2T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This size 200 unit is fitted with a 1/8 in NPT port, a 40 um standard filter element, and a differential-pressure drain that bleeds condensate automatically whenever the pressure drop across the element rises. The standard regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the round gauge on this code reads in psi so operators can set and monitor pressure in familiar US units. Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600, with port sizes from 1/8 in up to 1 in, manual, automatic or differential-pressure drains, a 5 um (W) element option, round or square gauges in MPa, psi or bar scales, and G (BSPP), NPT or PT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200C06C2T AirTAC Filter Regulator, NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
A 1/8 in filter regulator mounted at the fixture feeds clean, moisture-reduced air to compact clamping cylinders, with the psi gauge letting the setter hold the clamp pressure the jig was designed for.
On a compact automation cell, the GFR200C06C2T conditions the supply line before directional valves and small actuators, with the differential-pressure drain keeping condensate off the valve seats between service checks.
A lab rig running air-operated controls takes its supply through this unit: the 40 um element screens pipe scale and the regulator sets a stable, gauge-monitored pressure for repeatable test conditions.
Start with the port and size step: 1/8 in on this size 200 unit suits lighter air demand, while 300, 400 and 600 bodies step up in port and flow capacity. Choose the drain to match attendance: differential-pressure (this code) needs no routine attention, automatic (A) drains continuously, and manual (M) suits supervised points. Filter grade is 40 um standard here; specify W for 5 um where finer protection is needed. Gauge style and scale are decodable: this code carries a round gauge reading psi, and square gauges in MPa, psi or bar are available. Thread is NPT on this code; PT is the catalogue standard and G (BSPP) is also an option. A bracket is included on this code.
Flow for GFR units is published as curves, not a single rated number, so we do not quote a rated flow figure. Send us your application details and we will confirm sizing against the datasheet curves before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number for this unit. Tell us your application and line pressure and we will confirm the flow data from the datasheet on request before you order.
With no drain letter in the code, this unit uses the differential-pressure drain: condensate is discharged automatically when the pressure drop across the 40 um element rises, so no routine draining is needed. If you prefer, GFR units can be ordered with an automatic drain (code A) or a manual drain (code M); note that the regulator adjustment range differs by drain type, with manual-drain versions able to adjust from 0.05 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.