The AirTAC GFR200C06C2WK AirTAC Filter Regulator PT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06C2WK is a filter regulator: in one compact body it removes water and particulate from compressed air and holds the downstream pressure at your set point. This configuration is the 200 size with a PT1/8 port, a 5 um filter element for finer filtration than the 40 um standard grade, and a differential-pressure drain that discharges collected condensate when the pressure differential across the element calls for it. A round gauge reading in psi is fitted so the outlet pressure can be watched and adjusted, a check valve is built in to hold the downstream setting if the supply dips, a mounting bracket is included, and the bowl is polycarbonate (PC).
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, plus choices of drain type, filter grade, gauge style and scale, and G (BSPP) or NPT thread options to order. Maximum inlet pressure is 1.0 MPa (145 psi); for this differential-pressure drain configuration the regulator setting range is 0.15-0.9 MPa (20-130 psi); the operating temperature range is -5 to 70 C (non-freezing). Rated flow for the series is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR200C06C2WK AirTAC Filter Regulator PT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a robotic pick-and-place cell, this unit filters the plant air to 5 um and holds a steady regulated pressure to the gripper valves, with the check valve helping hold the setting if the main supply dips mid-cycle.
Lab analysers and sample-handling panels need clean, dry, closely set air. The 5 um element protects sensitive pneumatic components inside the instrument, and the psi gauge gives technicians a visible set point at the cabinet.
Small air-operated printing and labelling heads on a conveyor line run off a compact point-of-use supply. This 1/8 in filter regulator sits right at the head, keeping water and fine dirt out of the nozzle circuit.
The choices in this series are decodable straight from the code. Size 200 with a PT1/8 port suits compact circuits; step up through 300, 400 and 600 as your flow demand outgrows the smaller ports. Drain type: this unit carries the differential-pressure drain (the default); automatic (A) and manual (M) versions exist in the same family. Filter grade: this one has the 5 um element (code W) instead of the 40 um standard - pick 5 um where downstream instruments, transducers or fine control valves need cleaner air. The gauge fitted here is the round type reading in psi; the embedded square gauge is the standard fitting, with MPa or bar scales available. Thread is PT; G (BSPP) and NPT are catalogue options you can order.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow curve and the datasheet figures with you before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so there is no one number we can honestly quote. Tell us your application and we will confirm the flow curve and the full datasheet figures for this exact model on request, so you can size it against your real demand before ordering.
The W in the code GFR200C06C2WK selects the 5 um filter grade, which is the finer optional element; the standard grade in this series is 40 um. Choose 5 um when the downstream equipment - instruments, transducers, fine control valves - needs cleaner air than the standard grade provides. If your circuit only needs general water and particle removal, the 40 um version of the same size is the usual choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.